News

Knowledge

Company News

Application Mind Map

Test Report

Technical Article

Industry News

Common Applications of UV Wood Primer

Release time:

2026-03-30 23:31

After years of technological advancement and practical application, UV wood primers have been widely adopted across multiple sectors of wood product manufacturing. Different product types, production processes, and service environments place varying emphasis on primer performance, thereby determining the specific value that UV wood primers bring in different application scenarios.

I. The Panel Furniture Manufacturing Sector

Panel furniture is one of the most common applications for UV wood primers. This type of furniture uses engineered wood panels—such as medium-density fiberboard and particleboard—as its primary substrate, and its surfaces typically require direct topcoating. UV wood primers are primarily used for coating large, flat components, such as table tops and cabinet panel faces.

UV wood primers are extensively used in office furniture and residential panel furniture, such as wardrobes, beds, and TV cabinets. The primer coat seals the micro-pores and fibers on the surface of engineered wood panels, preventing the topcoat from being absorbed by the substrate while enhancing surface smoothness. The rapid curing properties of UV primers enable manufacturers to operate highly efficient assembly-line processes, significantly shortening production cycles.

II. Wood Flooring Manufacturing

Wood flooring is a major application area for UV wood primers. Solid wood flooring, engineered wood flooring, and laminate flooring all extensively utilize UV coating systems during manufacturing, with the primer layer playing a critical role.

In the coating of solid wood flooring, UV wood primer serves to seal the wood’s internal moisture and oils while providing a robust substrate for the topcoat. In the multi-layer coating system used for engineered wood flooring, the primer layer is applied and sanded multiple times to create an exceptionally smooth surface, laying the foundation for the topcoat’s high transparency and superior abrasion resistance.

III. Cabinet and Bathroom Cabinet Sector

Cabinets and bathroom vanities are used in relatively demanding environments, with prolonged exposure to moisture, grease, and various cleaning agents, which places stringent requirements on the water resistance and chemical resistance of the coating system.

Cabinet door panels typically use medium-density fiberboard or solid wood as the substrate, and a UV primer coat seals the substrate surface to prevent substances from migrating into the topcoat. Bathroom cabinets are exposed to humid conditions for extended periods; the dense cross-linked network of the UV wood primer provides excellent vapor-barrier performance, effectively preventing moisture from penetrating the substrate and thereby avoiding swelling, deformation, or mold growth due to moisture absorption.

IV. Wood Door Manufacturing Sector

Wood door products include solid wood doors, solid wood composite doors, and molded doors, among others. Their coating characteristics include large surface areas, complex designs, and stringent requirements for surface finish.

Solid-wood composite doors typically feature a flat-panel door leaf, with the surface finished using roll coating of a UV primer. For the edges and profiled sections of the door leaf, a spray application of the UV primer is employed to ensure uniform coverage even on complex, contoured areas. Molded doors, with their embossed and recessed surface textures, place stringent demands on the leveling and adhesion properties of the primer; spray application effectively meets these coating requirements.

V. Decorative Molding and Special-Shaped Components

Decorative trims include skirting boards, door casings, picture frame mouldings, and ceiling cornices, among others. These products are characterized by their slender profiles and complex cross-sectional geometries, making coating challenging. In this application area, UV wood primers are typically applied using spray coating and vacuum spray coating techniques.

Skirting boards and door casings are widely used trim products in interior decoration; after UV primer application, a dense, sealed coating is formed, enhancing the product’s stain resistance and scrubbing durability. Picture frames and decorative moldings have stringent surface-quality requirements; the rapid curing properties of UV primer enable multi-coat application, providing an excellent base for achieving the desired topcoat finish.

VI. Other Application Areas

Children’s toys and educational aids have extremely stringent requirements for the safety and environmental friendliness of coating products. UV wood primers, with their low volatile organic compound emissions and rapid curing properties, have found widespread application in this field. For wooden toys, kindergarten educational tools, and similar products, UV primers leave behind extremely low levels of residual monomers after curing, thereby meeting the safety standards for children’s products.

In the musical instrument manufacturing industry, the finish applied to the bodies of stringed instruments such as guitars and violins must balance protective properties with acoustic performance. A highly transparent UV primer can preserve the natural wood grain while providing essential sealing and protection.

VII. Conclusion

The application scope of UV wood primers encompasses a wide range of wood product manufacturing sectors, including panel furniture, wood flooring, kitchen cabinets, wooden doors, decorative moldings, children’s toys, and musical instruments. Different application scenarios place varying emphases on primer performance: some prioritize sealing properties, others stress adhesion, some seek exceptional smoothness, and still others focus on environmental friendliness and safety. With the continuous advancement of UV curing technology, the application areas for UV wood primers will expand even further, providing efficient, environmentally friendly, and high-quality surface coating solutions for a diverse array of wood products.

Disclaimer: The above content is sourced from the internet and is provided for reference only. If any infringement occurs, please contact us, and we will remove it promptly.

Bossin Recommended Products – UV Wood Coatings
Putty primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Sanding primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Apply primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-02	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-05	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-535	Polyester acrylate	Excellent adhesion, rapid curing, good flexibility, and yellowing resistance.
B-546	Polyester acrylate	Good adhesion, fast curing, and excellent flexibility.
White primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-529	Polyester acrylate	Good adhesion, low shrinkage, and excellent resin compatibility.
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
Single-item recommendation
Product Model/English Abbreviation	Product Name/Product Type	Product Features
BM2223 (TPGDA)	Di(propylene glycol) diacrylate	Good flexibility and low volatility
BM2224 (EO-HDDA)	Ethoxylated 1,6-hexanediol diacrylate	Good adhesion to plastics, good dilutability, and low volatility.
BM3231 (TMPTA)	Trimethylolpropane triacrylate	High crosslink density, high hardness, high gloss, and excellent wear resistance.
BM3235 (PET3A)	Pentaerythritol triacrylate	Fast curing, high crosslink density, high hardness, and excellent chemical resistance.
BM3380 (3EO-TMPTA)	Tripropylene Glycol Triacrylate	More flexible and less irritating than TMPTA.
BM6261 (DPHA-80)	Dipentaerythritol hexaacrylate	High crosslink density, high hardness, chemical and wear resistance, and water resistance.
BM6263 (DPHA-90)	Dipentaerythritol hexaacrylate	High crosslink density, high hardness, chemical and wear resistance, and water resistance.

Share to:

Main Types of UV Wood Primer

Method for Selecting UV Wood Primer (Part 2)