Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
The Impact of Humid Environments on UV Optical Adhesives (Part 4)
Release time:
2025-08-12 17:29
In the field of composite material bonding, UV optical adhesives are widely used across numerous industries—including aerospace and automotive manufacturing—thanks to their rapid curing and high bond strength. However, when composite‑material bonded joints are exposed to humid environments, the performance of UV optical adhesives faces significant challenges; in particular, internal stresses arising from size effects emerge as a critical factor leading to adhesive failure.
I. Differences in Moisture-Absorption-Induced Swelling Among Various Materials
Bonding of composite materials typically involves dissimilar materials; take the bonding of carbon fiber reinforced polymer (CFRP) to metal as an example. These two materials exhibit markedly different hygroscopic swelling behaviors. CFRP possesses a unique microstructure, in which the interface between the fibers and the matrix provides pathways for water molecules to penetrate, resulting in a relatively high hygroscopic swelling coefficient. By contrast, metals have a comparatively dense structure, making it difficult for water molecules to infiltrate in significant quantities, and thus their hygroscopic swelling is much more limited.
When a composite structure bonded with UV‑curable optical adhesive between CFRP and metal is exposed to a humid environment, water molecules gradually penetrate the material. The CFRP absorbs substantial amounts of moisture and undergoes significant swelling, whereas the adhered metal exhibits only limited expansion. This mismatch in hygroscopic swelling behavior among the dissimilar materials directly gives rise to dimensional effects.
II. Residual Stresses Induced by Size Effects
The size effect in adhesive joints of composite materials gives rise to severe internal stress issues. Due to the differential thermal expansion of CFRP and metals during moisture absorption, stress concentrations develop within the adhesive layer. As a bridging material that bonds these two substrates, UV‑curable optical adhesives are subjected to this non‑uniform stress distribution.
In regions of stress concentration, the adhesive layer is subjected to stresses far exceeding its own load-bearing capacity. As the humid environment persists, water molecules continuously penetrate the material, causing the CFRP to expand and leading to the progressive accumulation and escalation of internal stresses. Under such prolonged exposure to high-stress conditions, the adhesive layer’s internal structure gradually deteriorates.
III. Crack Propagation Caused by Residual Stress
Under the sustained action of internal stresses, microscopic cracks begin to form in the UV‑curable optical adhesive layer. These cracks may initially be extremely small and difficult to detect with the naked eye, yet they mark the onset of failure in the bonded structure. Over time, water molecules further penetrate these cracks, creating stress concentrations at the crack tips and driving their continued propagation.
Crack propagation is a gradual process that evolves from the microscopic scale of the adhesive layer to the macroscopic level. In the automotive manufacturing sector, this crack‑propagation phenomenon—driven by size effects—is particularly pronounced. During prolonged service, automotive components are inevitably exposed to humid environments, such as driving in the rain or undergoing car washes. As cracks continue to grow, the adhesive strength of the bond diminishes, potentially leading to the failure of the entire bonded assembly.
IV. Impact on Automobile Manufacturing
In automotive manufacturing, composite material bonding technology is widely employed across various applications, including body-in-white structures and interior components. For instance, some high-end vehicles utilize a hybrid CFRP–metal structure to reduce vehicle weight and enhance fuel efficiency. However, the impact of humid environments on UV‑curable optical adhesives poses significant challenges to the reliability and safety of these bonded assemblies.
When adhesive joints experience crack propagation due to size effects and ultimately fail, they can cause body panels to loosen or detach, compromising the vehicle’s normal operation. In extreme cases, this may even lead to safety incidents, posing a threat to occupants’ lives. Moreover, adhesive failure increases repair costs and downtime, imposing unnecessary financial losses on automakers and vehicle owners.
V. Conclusion
The impact of humid environments on UV‑curable optical adhesives used in composite material bonding cannot be overlooked. Dimensional changes arising from the differential moisture‑induced swelling of various materials generate internal stresses within the adhesive layer, which in turn promote crack propagation and ultimately lead to failure of the bonded structure. In industries such as automotive manufacturing, where reliability and safety are paramount, a thorough investigation and understanding of this issue are essential for ensuring product quality and driving safety.
Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.
| Bossin Related Product Recommendations – Liquid Optical Adhesive | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-2111D | Aliphatic polyurethane acrylate | Excellent adhesion, high elongation, and resistance to thermal shock. |
| B-2116 | Aliphatic polyurethane acrylate | Excellent adhesion, good flexibility, acid and alkali resistance, and excellent tensile strength. |
| B-215 | Aliphatic polyurethane acrylate | Good adhesion, excellent flexibility, water resistance, and acid resistance. |
| B-2621 | Aliphatic polyurethane acrylate | Excellent adhesion, resistant to strong acids and alkalis, and low curing shrinkage. |
| Monomer Recommendation | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| BM1105 (OPPEA) | 邻-Phenylphenoxyethyl acrylate | Low shrinkage, excellent adhesion, low volatility, high refractive index |
| BM1210 (PHEA) | 2-Phenoxyethyl acrylate | Low shrinkage, heat resistance, excellent adhesion, high refractive index |
| BM1211 (HPMA) | Hydroxypropyl methacrylate | HEMA-free, high strength, low irritation, and high adhesion |
| BM2101M (10EO-BPADMA) | Bisphenol A dimethacrylate ethoxylate | Low irritation, flexibility, excellent strength, and heat resistance |
| BM2224 (EO-HDDA) | Ethoxylation of 1,6-hexanediol diacrylate | It exhibits excellent adhesion to plastics, good dilutability, and low volatility. |
Share to:
Related News
The Effect of Humid Environments on UV Optical Adhesives (Part 3)
UV optical adhesives, owing to their rapid curing, high transparency, and excellent bonding performance, have found widespread application across numerous industrial sectors, particularly in bonding plastic substrates. However, in real-world applications, humid environments emerge as a critical factor that compromises the bonding performance and reliability of UV optical adhesives. When water molecules penetrate the interface between the plastic substrate and the UV optical adhesive, they trigger a series of complex physical and chemical changes, leading to degradation of bonding strength and posing a serious threat to product quality and performance.
The Impact of Humid Environments on UV Optical Adhesives (Part II)
In adhesive systems involving metals and UV‑curable optical adhesives, humid environments constitute a critical factor that cannot be overlooked; this is particularly true in electrochemical corrosion scenarios, where the deleterious effects are even more pronounced, severely degrading bond performance and structural stability.
The Effect of Humid Environments on UV Optical Adhesives (Part I)
In metal–glass bonding applications, UV optical adhesive serves as a critical bonding material, and its performance stability is of paramount importance. However, in humid environments, the adhesive’s bonding performance can be significantly compromised, thereby jeopardizing the reliability and integrity of the metal–glass joint.