Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Solutions to Common Problems in the Use of UV Coatings
Release time:
2025-07-09 01:08
UV coatings, owing to their rapid curing speed, energy efficiency, environmental friendliness, and excellent coating performance, have found widespread application in wood processing, automotive manufacturing, electronics, and numerous other industries. However, during practical use, several common issues may arise, including sagging, pinholing, haze, fish‑eye defects, significant variations in topcoat gloss, tackiness due to incomplete drying, strong odors after UV curing, substrate attack, oil bleeding, and yellowing of the cured film. To address these problems, the following detailed solutions are provided.
I. Sagging Phenomenon
1. Increase coating viscosity: Enhance the coating’s viscosity by adding a thickener or adjusting the resin-to-solvent ratio in the formulation.
2. Increase solid content: Raising the proportion of solids in the coating helps reduce sagging.
3. Increase the solvent evaporation rate: Use a solvent with a faster evaporation rate, or enhance ventilation in the coating environment.
4. Adjust the spray gun distance and paint output: Maintain an appropriate spray gun distance and paint flow rate to ensure uniform coating application.
5. Adjust line speed and reduce coating film thickness: Appropriately adjust the production line speed to lower the coating film thickness.
6. Reduce the baking temperature: This helps prevent excessive flow of the coating during the baking process.
II. Pinhole Issues
1. Increase the diluent ratio to reduce viscosity: By increasing the proportion of thinner, the viscosity of the coating is lowered.
2. Reduce coating film thickness: Decreasing the coating film thickness can minimize internal air bubbles and solvent residues.
3. Adjust the solvent evaporation rate: Select a solvent with an appropriate evaporation rate.
4. Increase the infrared leveling temperature or heat the UV coating: Raising the leveling temperature or heating the UV coating helps eliminate air bubbles in the coating.
5. Slow down the UV coating line speed to provide the coating with more leveling time.
III. Foggy Light Phenomenon
1. Increase coating viscosity: Raising the viscosity of the coating helps reduce splattering and atomization during the spraying process.
2. Increase solid content: Raise the proportion of solid components in the coating.
3. Increase the solvent evaporation rate: Accelerate solvent volatilization to minimize residual solvents during the coating’s curing process.
4. Adjust the spray gun distance and paint output: Maintain an appropriate spray gun distance and paint flow rate to ensure uniform coating application.
5. Adjust line speed, reduce coating film thickness, and lower baking temperature: Appropriately adjust the production line speed, decrease the coating film thickness, and lower the baking temperature.
IV. Fisheye Effect
1. Re-clean the workpiece and the surrounding environment: Use a dedicated cleaning agent or solvent to thoroughly clean both the workpiece and its surroundings.
2. Inspect the compressed air filtration system: Regularly check the compressed air filtration system to ensure that the compressed air is clean and free of contaminants.
3. Use an anti-fisheye agent: Add an appropriate amount of anti-fisheye agent to the coating.
5. Significant gloss variation in the topcoat
1. Optimize the coating formulation: By adjusting the ratios of resin, pigment, and filler, ensure formulation stability and enhance gloss uniformity.
2. Adjust coating process parameters: Maintain consistent spray gun pressure, paint output, and coating film thickness to minimize gloss variation.
3. Optimize curing conditions: Standardize curing temperature and time to enhance gloss consistency.
4. Perform regular equipment inspections: Ensure that coating and curing equipment is operating properly to prevent malfunctions that could cause abnormal gloss levels.
6. The paint is not dry and feels sticky to the touch.
1. Increase the curing machine’s power: Ensure sufficient power to meet the coating’s curing requirements.
2. Extend the curing time: Adjust the curing duration according to the coating’s properties to ensure complete curing.
3. Optimize the coating formulation: Adjust the resin-to-curing agent ratio to enhance both the curing speed and degree.
4. Perform regular equipment inspections: Ensure that the curing equipment is free of malfunctions to guarantee proper coating curing.
7. Strong odor after UV curing
1. Use low-VOC paints: Reduce the content of volatile organic compounds to minimize post‑curing odors.
2. Optimize curing conditions: Ensure complete curing of the coating to minimize residual odor.
3. Enhance equipment venting: Install additional exhaust systems in curing equipment to promptly remove generated odors.
VIII. Bottoming Phenomenon
1. Optimize the coating formulation: Adjust the resin-to-solvent ratio to enhance compatibility and adhesion, thereby preventing substrate erosion.
2. Adjust curing conditions: Modify the curing temperature and time according to the coating’s properties, ensuring that the underlying layer is fully cured before applying the topcoat.
3. Ensure the primer is fully cured: Before applying the topcoat, verify that the primer has dried completely to prevent substrate bleeding.
9. Oil Seepage Phenomenon
1. Increase coating viscosity: Raising the viscosity helps minimize sagging during the spraying process.
2. Increase coating film thickness: Appropriately increasing the film thickness can reduce shrinkage during the curing process.
3. Reduce the solvent evaporation rate: Use solvents with slower volatility or decrease ventilation to slow down solvent evaporation.
4. Adjust the spray gun distance and paint output: Ensure uniform coating application and prevent localized thinning that could lead to paint runs.
X. Yellowing of the Paint Film
1. Select coating ingredients that are resistant to oxidation, such as UV stabilizers and antioxidants, to minimize yellowing.
2. Optimize curing conditions: Avoid exposure to high temperatures and ultraviolet radiation, and select appropriate curing temperature and duration.
3. Strengthen paint storage and management: Maintain a cool, dry environment, regularly check expiration dates, and prevent yellowing.
XI. Conclusion
To address common issues in the application of UV coatings, effective solutions can be implemented through a variety of measures, including optimizing the coating formulation, adjusting coating process parameters, ensuring consistent curing conditions, and conducting regular inspections and maintenance of coating equipment. In practice, it is essential to develop tailored solutions based on the root causes of specific problems and the actual operating conditions, while strengthening process and quality control to guarantee both the performance of UV coatings and the quality of the resulting coatings.
Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.
| Bossin Related Product Recommendations – 3C Coatings | ||
| General-purpose | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-102 | Bisphenol A epoxy acrylate | High hardness, high gloss, chemical resistance, contains 15% TMPTA. |
| B-151 | Modified epoxy acrylate | Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion. |
| B-165 | Modified epoxy acrylate | Good flexibility and strong adhesion |
| B-216 | Aliphatic polyurethane acrylate | Fast curing, high fullness, and excellent toughness. |
| B-368 | Aliphatic polyurethane acrylate | Good toughness, excellent leveling, excellent bend resistance, and excellent heat resistance. |
| B-574C | Polyester acrylate | Low viscosity, low odor, excellent wettability, suitable for LED UV. |
| B-601 | Aromatic polyurethane acrylate | High hardness, scratch resistance, chemical resistance, and excellent cost-effectiveness. |
| B-6019 | Special functional group acrylate | Good leveling, excellent wettability, resistant to boiling water, and excellent color dispersion. |
| B-609 | Aliphatic polyurethane acrylate | Fast curing, high hardness, scratch resistance, and chemical resistance. |
| B-615A | Aliphatic polyurethane acrylate | Fast curing, excellent toughness, wear resistance, and chemical resistance. |
| B-619W | Aliphatic polyurethane acrylate | Fast curing, high hardness, excellent toughness, wear resistance, and chemical resistance. |
| B-6380N | Special functional group acrylate | Excellent adhesion to plastics, strong hiding power, and improved paint film appearance. |
| B-919B | Aliphatic polyurethane acrylate | Fast curing, high hardness, excellent toughness, and outstanding chemical and wear resistance. |
| Matte | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-572 | Polyester acrylate | Low viscosity, low odor, excellent wettability, suitable for LED UV. |
| B-650A | Aliphatic polyurethane acrylate | Low viscosity, excellent matting effect, fast curing, and good wettability. |
| Wearable device | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-6211 | Aliphatic polyurethane acrylate | Fast curing, high hardness, scratch-resistant, and free of organotin. |
| Hand feel | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-328M | Aliphatic polyurethane acrylate | Low gloss, low viscosity, excellent wettability, and a pleasant hand feel. |
| B-868 | Organosilicon photocurable resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
| B-868H | Organosilicon photocurable resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
| Large-area spraying | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-374 | Aliphatic polyurethane acrylate | Good flexibility, excellent leveling, resistant to abrasion and chemicals, and yellowing‑resistant. |
| Car interior | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-6063 | Special functional group acrylate | High molecular weight, low curing shrinkage |
| B-6210 | Aliphatic polyurethane acrylate | Low viscosity, chemical resistance, environmental resistance, and dual photocatalytic–thermal curing. |
| B-6263 | Special functional group acrylate | Fast curing, high build, boil‑water resistant, and excellent toughness. |
| B-916 | Aliphatic polyurethane acrylate | Low viscosity, solvent resistance, chemical resistance, and steel-wool resistance. |
| B-919B | Aliphatic polyurethane acrylate | Fast curing, high hardness, excellent toughness, and outstanding chemical and wear resistance. |
| Resistant to steel wool | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-910A2 | Aliphatic polyurethane acrylate | Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance. |
| B-916 | Aliphatic polyurethane acrylate | Low viscosity, solvent resistance, chemical resistance, and steel-wool resistance. |
| B-919B | Aliphatic polyurethane acrylate | Fast curing, high hardness, excellent toughness, and outstanding chemical and wear resistance. |
| Oil-resistant pen | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-868 | Organosilicon photocurable resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
| B-868H | Organosilicon photocurable resin | Excellent leveling, smooth finish, fast curing, and stain resistance. |
| Battery casing | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-431 | Cycloaliphatic Specialty Acrylate | Yellowing-resistant, excellent wettability, low viscosity, fast curing |
| B-548 | Polyester acrylate | Withstands high temperatures of 250–280°C. |
| Solid color paint | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-519 | Self-curing polyester acrylate | Self-initiated photopolymerization performance |
| B-560 | Polyester acrylate | Fast curing and excellent pigment wetting. |
| Yellowing resistance | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| B-151 | Modified epoxy acrylate | Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion. |
| B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and excellent adhesion. |
| B-216 | Aliphatic polyurethane acrylate | Fast curing, high fullness, and excellent toughness. |
| B-296 | Aliphatic polyurethane acrylate | Fast curing, chemical resistance, yellowing resistance, impact resistance |
| B-431 | Cycloaliphatic Specialty Acrylate | Yellowing-resistant, excellent wettability, low viscosity, fast curing |
| Monomer Recommendation | ||
| Product Model/English Abbreviation | Product Name/Product Type | Product Features |
| BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
| BM3235 (PET3A) | Pentaerythritol triacrylate | Fast curing, high crosslink density, high hardness, and chemical resistance. |
| BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
| BM4241 (DiTMPTA-80) | Bis(2,3-hydroxymethylpropyl) tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM4242 (Di-TMPTA) | Bis-trimethylolpropane tetraacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM6261 (DPHA-80) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
| BM6263 (DPHA-90) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and wear resistance, and water resistance. |
Share to:
Related News
Application Areas and Advantages of UV Coatings
UV coatings, a new class of coatings that cure rapidly upon exposure to ultraviolet radiation, have found widespread application across numerous industries thanks to their environmentally friendly nature, high efficiency, energy savings, and superior coating performance. This article provides an overview of the specific applications of UV coatings in various sectors.
How to Select Raw Materials for UV Coatings
UV coatings are widely used in numerous industries—including ink printing, furniture manufacturing, wood processing, paper coating, and plastic finishing—thanks to their rapid curing speed, environmental friendliness, energy efficiency, and excellent coating performance. The performance of UV coatings largely depends on the selection of raw materials; this article provides a comprehensive overview of how to scientifically and rationally choose UV coating ingredients, including oligomers, reactive diluents, photoinitiators, and additives.
Troubleshooting Common Issues When Using UV Paper Varnish
In the modern printing industry, UV paper varnishes are widely used thanks to their high gloss and rapid curing properties. However, during practical application, a range of issues can arise that compromise product quality, including surface bubbles and pinholes, poor adhesion, white spots and pinholes, uneven coating, strong residual odors, and sensitivity to seasonal variations. The following provides a systematic overview of these problems along with corresponding mitigation strategies.