Analysis of Common Issues in UV Coating on Paper


In the modern printing industry, UV coating on paper is a highly efficient and environmentally friendly surface‑finishing technique that is widely employed in the processing of various printed materials. UV varnish not only significantly enhances the gloss and abrasion resistance of printed products but also provides effective protection for the printed graphics and text, thereby extending their service life. However, in practical applications, the use of UV varnish often gives rise to a range of challenges that not only compromise print quality but also increase production costs and complicate manufacturing processes.

I. The UV varnish has thickened and exhibits a gel-like consistency.

1. Excessive storage time: Prolonged storage can reduce the chemical stability of the varnish, strengthen intermolecular interactions, and lead to gelation.

2. Improper storage conditions: Insufficient light protection or excessive temperature can accelerate the curing reaction of the varnish, leading to thickening or gelation.

3. Excessive addition of the photoinitiator: Overdosing may trigger unwanted polymerization reactions, leading to gelation of the varnish.

II. Strong residual odor

1. Incomplete drying and curing: The uncured varnish contains a high proportion of volatile components, resulting in residual odor.

2. Insufficient UV light source or aging of the lamp: inadequate irradiance can compromise curing performance and exacerbate odor emissions.

3. Excessive use of non-reactive diluents: Diluents that do not participate in the reaction, such as ethanol, can remain in the coating and contribute to odor.

4. Poor-quality reactive diluents: Low‑quality diluents have a strong odor and are difficult to volatilize.

5. Prolonged storage of varnish: Long-term storage may lead to the accumulation of internal gases, resulting in a stronger odor.

III. The Impact of Seasonal Changes on UV Varnish

1. Temperature: In summer, high temperatures accelerate curing but can easily lead to cracking and peeling of the coating; in winter, low temperatures reduce fluidity, slow down curing, and adversely affect gloss and adhesion.

2. Humidity: Excessive humidity hinders drying and can lead to bubbles and contamination; while low humidity promotes drying, it may also cause static‑electricity issues.

IV. Poor luster and insufficient brightness

1. Too low viscosity or too thin a coating: The varnish is too thin, or the application amount is insufficient, failing to create an adequate reflective surface.

2. Excessive dilution with a non-reactive solvent: Overdilution reduces the concentration of the active ingredients, compromising gloss performance.

3. Uneven coating: Non-uniform distribution results in poor local gloss.

4. High paper absorbency: Papers with a high oil absorption rate cause the varnish to be extensively absorbed, preventing the formation of a glossy finish.

5. Poor drying, incomplete curing, and a sticky surface

1. Insufficient UV intensity or aging of the lamp: inadequate light energy results in incomplete curing.

2. Prolonged storage of the varnish: the photoinitiator loses activity, thereby reducing curing efficiency.

3. Excessive diluent addition: Non-reactive diluents reduce curing efficiency, resulting in a tacky surface.

6. UV varnish fails to coat properly and causes blooming.

1. If the varnish viscosity is too low or the coating is too thin, it will be difficult to fully cover the printed surface, resulting in uneven coating.

2. Excessive amounts of blending oil or drying agent in the ink: This can impair the adhesion between the varnish and the ink.

3. Crystallization on the ink surface: a hardened surface impedes the penetration of varnish.

4. Excessive release agents (silicone oil, spray powder): The release layer impairs adhesion.

5. The adhesive‑coating doctor roller is too fine: insufficient oil supply results in uneven coating.

VII. Bubbles and Pinholes on the Coated Surface

1. Substrate surface issues: Unevenness, impurities, or dust can cause bubbles and pinholes.

2. UV varnish issues: Improper viscosity, the presence of impurities, or poor leveling can all lead to defects.

3. Coating process issues: Poor equipment condition, uneven pressure, and improper operation can all lead to bubbles and pinholes.

4. Environmental factors: Impurities in the air or excessive humidity can also affect coating quality.

8. Poor adhesion of UV varnish

1. Crystallization on the ink surface: a hardened surface impedes the adhesion of varnish.

2. Inappropriate ink additives: They affect the adhesion between the varnish and the ink.

3. Poor adhesion of the varnish itself: an improper formulation results in inadequate adhesion.

4. Topcoat or base coat has expired: Prolonged storage can compromise its performance.

5. Incompatibility between topcoat and base coat: Products from different manufacturers often have poor compatibility.

6. Applying varnish before the ink has dried: This compromises adhesion.

7. Insufficient UV irradiance: Aging of the lamp or improper positioning can impair curing.

8. Excessive addition of water or alcohol: Adhesion caused by moisture.

9. Non‑compliant operation: Contamination of the varnish during the cleaning process.

10. Unsuitable ambient temperature and humidity, or excessive equipment speed: these factors can compromise curing and adhesion performance.

IX. Summary

As demonstrated by the foregoing analysis, common issues in the UV coating process for paper coatings span multiple aspects, including materials, processes, equipment, and the operating environment. To address these challenges, systematic improvements should be pursued by optimizing the coating formulation, enhancing storage management, fine-tuning coating parameters, and improving the working environment, thereby enhancing the performance of UV coatings and the overall quality of printed products.

Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.

Bossin Recommended Products – Paper Varnish
Product Model/English Abbreviation Product Name/Product Type Product Features
B-113 Bisphenol A epoxy acrylate High hardness, high gloss, high fullness, containing 20% TPGDA.
B-163 Modified epoxy acrylate Good flexibility, excellent pigment wetting, and strong adhesion.
B-165 Modified epoxy acrylate Good flexibility and strong adhesion
B-21 Active amine photosensitizing promoter Low color number, benzene-free, antioxidant and polymerization inhibitor, enhances curing rate.
B-21C Active amine photosensitizing promoter Low color number, antioxidant and polymerization inhibitor, enhances curing rate.
B-27 Active amine photosensitizing promoter Low color number, benzene-free, low odor, antioxidant and polymerization inhibitor
B-520 Polyester acrylate Low viscosity, high gloss, excellent wettability, and cost-effective.
B-522 Polyester acrylate Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-574C Polyester acrylate Low viscosity, low odor, excellent wettability, suitable for LED UV.
BM2223 (TPGDA) Dipropylene glycol diacrylate Good flexibility and low volatility
BM2224 (EO-HDDA) Ethoxylation of 1,6-hexanediol diacrylate It exhibits excellent adhesion to plastics, good dilutability, and low volatility.
BM3231 (TMPTA) Trimethylolpropane triacrylate High crosslink density, high hardness, high gloss, and excellent wear resistance.
BM3380 (3EO-TMPTA) Pentaerythritol triacrylate More flexible and less irritating than TMPTA.

Share to:

Related News


A Detailed Guide to the Application Methods of UV Paper Varnish

As an efficient surface‑finishing material for printed materials, UV paper varnish has found widespread use in the printing industry thanks to its outstanding gloss, abrasion resistance, environmental friendliness, and rapid curing properties. This article provides a comprehensive analysis of the various application methods for UV paper varnish, covering their underlying principles, advantages, and suitable application scenarios.


Exploring Common Issues in UV Inkjet Technology (Part 6)

UV inkjet technology, with its notable advantages of high efficiency, environmental friendliness, and exceptional precision, has found widespread application across numerous fields, including advertising production, packaging printing, and the reproduction of artworks. However, in practical operations, excessive color deviation has emerged as a significant issue that cannot be overlooked. Such color discrepancies not only compromise the aesthetic appeal of printed outputs but can also negatively impact brand image and customer satisfaction. This article will thoroughly examine the specific manifestations of excessive color deviation, analyze its underlying causes, and propose effective solutions.


Exploring Common Issues in UV Inkjet Technology (Part 5)

UV inkjet printing technology, with its high precision, high efficiency, and environmentally friendly characteristics, has demonstrated broad application potential across numerous fields. However, during actual printing, issues such as ghosting and double‑line artifacts frequently arise, becoming key factors that compromise print quality and visual appeal. This paper delves into the underlying causes of ghosting and double‑line problems in UV inkjet technology and proposes corresponding solutions, aiming to provide valuable guidance for professionals in related industries.