Applications of UV Coatings for Plastic Vacuum Plating


1

PVD Plastic Vacuum Plating Principle and Process

1. Principle and Process
PVD, or Physical Vapor Deposition, is a technique in which, under vacuum conditions, a physical method—typically heating—is used to vaporize a certain material (the coating material) into gaseous atoms, molecules, or partially ionized ions. These species are then deposited onto the surface of a substrate (the plastic to be coated) through a low-pressure process, forming a thin film with specific functional properties.
Plating material:
Pure metals: Al, Cu, In, Sn, etc.;
Alloys, metal oxides: SiO2, Cu+Ni, In+Sn, etc.
2. Schematic Diagram of the Electroplating Process

Process Control: Coating Film Thickness, Curing Energy.

2

PVD Coating Application Fields

1. Classification of Coated Products

2. Targeted materials

Easy to adhere to substrates: ABS, PC, and ABS+PC; can adhere with conventional formulations and solvents.
Difficult to adhere to: PP, PET, PA, glass, ceramics, metals, glass fiber + PC; requires pre-coating: Primer treatment agent.
3. The role of plastic electroplating

Metallic plating on plastic surfaces for a high-quality texture;
Plastics are easy to mold and relatively inexpensive.
Electromagnetic wave shielding (replacing EMI coatings).

3

Introduction to PVD Technology

4

UV primer

1. Formulation architecture of the UV primer

2. PVD Primer Application Flowchart

Typical construction solids content: 40-55%; viscosity: 10-12 seconds, NK-2# (25℃);
IR: 50–70℃ × 3–5 min; UV: 400–800 mJ/cm²; Film thickness δ: 15–25 μm.
3. Example 1 of UV Primer Formulation

4. Example 2 of UV Primer Formulation

5. Example 3 of UV primer formulation

6. Example 4 of UV Primer Formulation

7. Example 5 of UV primer formulation

5

UV Mid-Coat

1. Formulation architecture of UV mid-coat

2. Application Map for PVD Mid-Coat

The solid content of the construction material is 15-30%; choose strong and fast solvents (ketones, esters).
IR: 50–70℃ × 3–5 min; UV: 300–500 mJ/cm²; Film thickness δ: 5–8 μm.
3. Example of UV Mid-Coat Formulation

6

UV topcoat

1. Formulation structure of UV surface coating

2. Application Map for PVD Surface Coating

The topcoat is the visual manifestation of comprehensive mechanical performance and is designed to meet different requirements.
Some special properties require the combination of additives, organic-inorganic hybrids, or inorganic materials.
IR: 50-70℃ × 5-8 min; UV: 600-1200 mJ/cm²;
Membrane thickness δ: 15–40 μm.
3. Example 1 of UV topcoat formulation

4. Example 2 of UV topcoat formulation

5. Example 3 of UV topcoat formulation

7

Recommendations for the Application of Boxing Products in PVD Processes

Share to:

Related News