Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Solutions to Common Problems with Traditional Adhesives
Release time:
2025-05-08 17:00
In industrial production and routine maintenance, traditional adhesives are widely used. However, during actual operations, adhesives may exhibit various undesirable phenomena, such as sticky adhesive layers, excessive brittleness, roughness, cracking, insufficient thickness, looseness, and debonding. These issues not only affect the aesthetic quality of products but can also reduce bonding strength and durability, thereby compromising the overall performance and service life of the products. This article will systematically explore the causes of these adverse phenomena and propose effective countermeasures from multiple perspectives.
1. The adhesive layer is too thin.
A thin adhesive layer is a typical issue in the application of conventional adhesives, often resulting in insufficient bonding strength and making the joint prone to delamination and fracture. To address this problem, one can appropriately increase the amount of adhesive applied and optimize the adhesive-coating equipment to ensure even distribution. At the same time, it’s important to carefully control the clamping pressure to prevent excessive pressure from squeezing out the adhesive layer. Additionally, based on the specific properties of the adhesive, selecting an appropriate curing temperature will help ensure that the adhesive layer reaches its ideal thickness during the curing process.
II. Excessive and Loose Adhesive Layer
Although excessive胶 layer thickness is not directly mentioned as a common issue, a loose胶 layer is often associated with applying too much胶 while achieving uneven curing. This manifests as voids within the胶 layer, which in turn compromise the bonding strength. Solutions include appropriately extending the tack-free time to ensure sufficient solvent evaporation; adopting a thin-coat, multi-layer application approach to avoid applying too much胶 in a single coat; and enhancing the surface preparation of the substrates to improve the adhesive’s penetration.
3. Brittleness of the adhesive layer
The brittleness of the adhesive layer is manifested as excessive hardness and insufficient toughness after curing, making it prone to fracture under stress. To address this issue, an appropriate amount of toughening (plasticizing) agent can be added to improve the toughness of the adhesive layer. Additionally, the dosage of curing agent and the curing temperature should be strictly controlled to prevent rapid curing that leads to excessive hardness. At the same time, the formulation design should be optimized by reducing the resin content and enhancing the flexibility of the adhesive layer.
4. Rough adhesive layer
The roughness of the adhesive layer manifests as an uneven surface with particles or bubbles, which can compromise bonding strength and reduce the aesthetic appeal of the product. To address this issue, strategies include increasing the mixing intensity to ensure thorough blending of all adhesive components; selecting high-quality adhesives and avoiding the use of expired or substandard products; and improving ventilation conditions and reducing ambient humidity to prevent the adhesive from absorbing moisture or retaining volatile substances.
5. The adhesive layer becomes sticky.
The tackiness of the adhesive layer is characterized by the surface remaining sticky even after curing, which adversely affects bonding performance and product quality. Solutions include raising the curing temperature to accelerate the curing reaction; selecting a curing agent that is well compatible with the adhesive matrix; and thoroughly mixing the adhesive and curing agent, extending the mixing time, and improving the uniformity of the mixture.
6. Bonding misalignment
Adhesive misalignment occurs when the bonded components shift out of position during the bonding process, thereby affecting the structural integrity and performance of the product. Solution strategies include precise positioning operations and the use of specialized fixtures to secure the bonded components; controlling adhesive parameters by selecting adhesives with moderate fluidity; and optimizing the curing process through methods such as applying initial curing before exerting pressure and employing stepped temperature increases, which help reduce stress concentrations during bonding.
7. Debonding
Debonding manifests as separation between the adhesive layer and the adherend. Solution strategies include enhancing surface pretreatment to improve the wettability of the adhesive; precisely matching the type and performance of the adhesive to ensure compatibility with the material of the adherend and the service environment; and strictly controlling process parameters such as curing temperature, time, and pressure.
8. Cracks in the adhesive layer
Cracks in the adhesive layer manifest as cracks appearing either within the adhesive layer itself or on its surface. The corresponding solutions include optimizing the joint design and pre-configuring the assembly to ensure proper fit between contacting surfaces; improving the performance of the adhesive by adding thickeners to enhance its thixotropic properties; and optimizing the curing process by controlling the curing pressure to prevent excessive pressure from causing cracks in the adhesive layer.
9. Summary
In summary, the problems encountered in the application of traditional adhesives are complex and diverse, requiring a multifaceted approach that addresses material selection, process control, environmental conditions, and other factors through targeted measures. By optimizing the coating process, improving curing conditions, and enhancing material pre-treatment, it is possible to significantly improve the adhesive performance and product quality.
|
Bossin Related Product Recommendations |
||
|
UV adhesive |
||
|
Product Type |
Product Features |
Application areas |
|
B-151 |
Low halogen, excellent flexibility, yellowing resistance, good plating performance, and strong adhesion. |
Vacuum-plated UV coatings, metal/plastic UV varnishes, UV adhesives, UV nail gel coatings |
|
B-151DT |
Yellowing resistance, good flexibility, excellent plating performance, and strong adhesion. |
Vacuum-plated UV coatings, metal/plastic UV varnishes, UV adhesives, UV nail gel coatings |
|
B-186 |
Resistant to boiling water, excellent adhesion to glass, high-temperature resistance, and chemical resistance. |
Glass UV glue |
|
B-2058P-2 |
It features excellent adhesion, low curing shrinkage, superior flexibility, high tensile strength in the cured film, and resistance to strong acids and strong bases. |
UV adhesives for bonding various plastics, specialty substrates, and glass |
|
B-211A |
Good adhesion to glass/metal, excellent flexibility, and water resistance. |
Glass/Metal UV Adhesive |
|
B-2111D |
Good adhesion to various substrates, high elongation, and resistance to both high- and low-temperature shocks. |
UV liquid optical adhesive, UV adhesive |
|
B-2116 |
Good adhesion to plastics, excellent flexibility, acid and alkali resistance, and high elongation at break. |
UV glue |
|
B-215 |
Good adhesion to glass/metal, excellent flexibility, water resistance, and acid resistance. |
Glass/Metal UV Adhesive |
|
B-2621 |
Low shrinkage upon curing, excellent flexibility, highly stretchable cured film, and resistance to strong acids and strong bases. |
UV glue |
Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly.
Share to:
Related News
Analysis of Common Issues with Traditional Adhesives
In industrial production and everyday applications, traditional adhesives occupy a significant position due to their advantages such as low cost and ease of use. However, during their application, they often encounter various problems that directly affect the reliability and durability of bonded structures. This article provides a systematic analysis of common issues associated with traditional adhesives, taking into account multiple aspects.
Basic Classification of UV Adhesives
UV adhesives, or ultraviolet-curable adhesives, play an important role in modern industry thanks to their efficient and environmentally friendly properties. By rapidly curing upon exposure to ultraviolet light, they not only enhance production efficiency but also meet the dual demands of high performance and environmental sustainability.
Development Trends of Traditional Adhesives
As an indispensable foundational material in modern industry and daily life, traditional adhesives directly influence the development of numerous sectors through their performance and application scope. However, with increasingly stringent environmental regulations and diversifying market demands, the environmental pollution and performance limitations inherent in the production and use of traditional adhesives urgently need to be addressed. To meet these new challenges, traditional adhesives are evolving toward greater environmental friendliness, higher performance, greater functional diversity, and intelligent manufacturing. These trends reinforce and synergistically develop together, collectively propelling the traditional adhesive industry to new heights.