Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Composition ingredients of traditional PCB ink
Release time:
2025-03-06 17:20
PCB ink, as a critical material in the manufacturing process of printed circuit boards (PCBs), requires a complex and meticulous selection and proportioning of its raw materials. These raw materials are essential to PCBs—they not only determine the ink’s physical properties and printing performance but also directly affect the quality of PCB fabrication and the overall performance of electronic devices.
Before the advent of UV PCB inks, the raw materials commonly used in traditional PCB inks primarily included resins, pigments, solvents, additives, and fillers. The following is a detailed introduction to these raw materials:
I. Resin
Resin is the core component that forms the ink film and determines the performance of the ink. Common resins used in traditional PCB inks include phenolic resin, epoxy resin, and polyurethane resin. These resins endow the ink with excellent properties such as adhesion, hardness, water resistance, solvent resistance, acid-alkali resistance, and temperature resistance.
Phenolic resin: Phenolic resin boasts excellent heat resistance and chemical resistance, making it suitable for PCB inks that require higher thermal performance.
Epoxy resin: Epoxy resin boasts excellent insulation properties and chemical resistance, and is commonly used to manufacture solder mask inks and circuit board inks.
Polyurethane resin: Polyurethane resin boasts excellent abrasion resistance and weatherability, making it suitable for applications with high demands on ink performance.
II. Pigments
Pigments are the key components that impart color to inks. The pigments used in traditional PCB inks are broadly categorized into two main types: organic pigments and inorganic pigments.
Organic pigments boast brilliant colors and an extensive color spectrum, though their covering power is relatively weak. They are often used to formulate PCB inks that require vivid colors, such as text inks.
Inorganic pigments boast strong covering power and excellent lightfastness and weather resistance, making them ideal for formulating PCB inks that require long-term color retention. Inorganic pigments such as titanium white, zinc white, iron blue, and carbon black are widely used in solder mask inks and circuit board inks.
III. Solvent
Solvents in inks serve to dissolve resins, pigments, and additives, and they also regulate the ink’s viscosity to suit different printing processes. Commonly used solvents include volatile solvents such as alcohols, ketones, and esters.
Alcoholic solvents—such as ethanol and methanol—possess excellent solubility and volatility and are commonly used to dissolve resins and adjust the viscosity of inks.
Ketone solvents—such as acetone and methyl ethyl ketone—possess strong solvency and high volatility, making them suitable for inks that require rapid drying.
Ester solvents—such as ethyl acetate and butyl acetate—feature good solubility and volatility, and they impart a moderate drying speed to inks.
IV. Additives
Additives are substances added to inks to improve their physical properties, enhance printability, and boost printing performance. Depending on the specific process and application scenario, commonly used additives include defoamers, dispersants, diluents, leveling agents, adhesion promoters, color separation inhibitors, sedimentation inhibitors, plasticizers, coupling agents, ultraviolet absorbers, catalysts, and thickeners, among others.
Defoamer: Used to eliminate bubbles in ink and improve the printing quality of the ink.
Dispersant: Used to disperse pigment particles, enhancing the uniformity and stability of inks.
Diluent: Used to adjust the viscosity of ink, enabling it to be suited to different printing processes.
V. Fillers
Fillers are auxiliary ingredients in ink, used to regulate its rheological properties, reduce costs, and enhance certain ink performance characteristics. Commonly used fillers include talc and calcium carbonate.
Talc powder: Possesses excellent lubricity and dispersibility and is often used to adjust the rheology of inks.
Calcium carbonate: Used to reduce costs and improve certain physical properties of inks.
VI. Summary
In summary, the raw materials for conventional PCB inks include resins, pigments, solvents, additives, and fillers. The selection and proportioning of these raw materials significantly influence the ink’s performance and printing results. During use, careful design and adjustment are required to meet the diverse needs of different PCB manufacturing processes.
Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly.
Share to:
Related News
The Origin and Development of Traditional PCB Inks
The origins of traditional PCB inks can be traced back to the mid-20th century, when the rapid development of electronic devices—particularly the widespread adoption of products such as televisions and tape recorders—led to a sharp increase in demand for circuit boards. In the early days, circuit board manufacturing relied primarily on colloidal masks using dichromate salts as photosensitive agents. However, these masks had several drawbacks, including cumbersome handling, high cost, and a tendency to catch fire, making them unsafe. As a result, people began exploring new mask materials and technologies.
The functions of PCB inks in different colors
In the PCB manufacturing process, the selection and application of inks play a crucial role. PCB inks of different colors not only give circuit boards a vibrant and colorful appearance, but more importantly, each color carries unique functions and characteristics, meeting diverse application requirements.
Why are there PCB inks of different colors?
In the electronics manufacturing industry, the PCB (printed circuit board), as a fundamental component of electronic devices, directly influences the stability and reliability of the entire device through its quality and performance. In the PCB manufacturing process, the selection and application of inks play a crucial role. Observant individuals may notice that PCB inks come in a variety of colors—common ones include green, black, white, and blue. So, what’s the reason behind the different colors of PCB inks?