Selection of UV Ink Raw Materials


The performance and quality of UV inks—key factors determining the final visual outcome of printed materials—largely depend on the careful selection and formulation of their raw materials. The process of selecting these raw materials is complex and highly meticulous, involving the combination and interaction of numerous chemical components. Choosing the right raw materials is crucial for ensuring the high quality of the finished product.

I. Prepolymer

The prepolymers are the most fundamental component of UV inks and serve as the film-forming substance, playing a crucial role in both the curing process and the properties of the cured ink film. When selecting prepolymers, the primary consideration should be their skeletal structure, as the skeletal structure significantly influences the coating’s hardness, abrasion resistance, adhesion, lightfastness, chemical resistance, and water resistance.

1. Types: The prepolymers primarily consist of acrylate resins such as epoxy acrylate resins, polyurethane acrylate resins, polyester acrylate resins, polyether acrylate resins, polyacrylate esters, and unsaturated polyester resins. These prepolymers may contain oligomeric or oligomer-like structural units formed by the polymerization of acrylic monomers. These prepolymers play a crucial role in the curing process and in determining the properties of the cured ink film. Under identical conditions, acryloyl groups exhibit the fastest photo-curing rate; therefore, most oligomers are acrylate resins.

2. Key Selection Points: Choose the appropriate resin type based on the specific application requirements and performance specifications of the ink. For example, for inks requiring high hardness and chemical resistance, epoxy acrylate resins can be selected; for inks needing good adhesion and flexibility, polyurethane acrylate resins are a suitable choice.

II. Reactive Diluent

Active diluents in UV inks are primarily used to adjust the ink’s viscosity, curing speed, and cured-film performance.

1. Types: Most are acrylate monomers, which can be classified into single-functional and dual-functional types depending on the number of acryloyl groups they contain.

2. Key selection points: Monomers with more functional groups exhibit faster curing speeds but have poorer dilution performance. Therefore, when making your selection, you need to take into account comprehensively factors such as ink viscosity, curing speed, and performance requirements. Meanwhile, environmentally friendly UV inks require monomers that feature low viscosity, excellent dilution performance, rapid curing, strong adhesion to substrates, minimal skin irritation, low toxicity, and no lingering odor in the coating.

III. Photoinitiator

A photoinitiator is an essential component of UV inks, capable of absorbing ultraviolet radiation energy and generating active intermediates with polymerization-initiating capabilities.

1. Types: They can be categorized into hydrogen-abstraction types and cleavage types. The hydrogen-abstraction type requires combination with a compound containing active hydrogen (a co-initiator), which, through a hydrogen-abstraction reaction, generates free radicals. The cleavage type, on the other hand, involves the photoinitiator undergoing laser-induced intramolecular decomposition to yield free radicals.

2. Key selection criteria: Choose a photoinitiator that exhibits high absorption efficiency for UV wavelengths, good stability, and low cost. At the same time, it is important to consider the compatibility and reactivity of the photoinitiator with other components in the ink.

IV. Pigments

Pigments play a crucial role in imparting color to inks and directly influence certain properties of the ink.

1. Types: Pigments are broadly classified into two major categories—organic pigments and inorganic pigments. Organic pigments come in a wide variety of types, offer a full range of colors, and generally outperform inorganic pigments in terms of performance; therefore, synthetic organic pigments are commonly used.

2. Key selection criteria: Choose the appropriate pigment type based on the ink’s color development requirements and color stability. At the same time, consider the compatibility and dispersibility of the pigment with other components in the ink.

V. Additives

Additives are primarily used to improve the performance of inks or impart special properties to them.

1. Types: Includes dispersants, defoamers, stabilizers, leveling agents, waxes, and more.

2. Key Selection Points: Based on the specific application requirements and performance specifications of the ink, select the appropriate type and dosage of additives. For example, for inks requiring high gloss, a leveling agent can be added to improve the flow and leveling properties of the ink layer; for inks intended for long-term storage, a stabilizer can be added to enhance their storage stability.

VI. Summary

The selection of UV ink raw materials requires a comprehensive consideration of the ink’s specific application requirements, performance specifications, and environmental standards. By making rational choices of raw materials, it is possible to produce UV ink products with excellent performance that are both environmentally friendly and safe.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


Adjustment and Optimization of UV Ink Printing

UV ink printing is widely used in various types of printed materials. However, to achieve the best possible printing results with UV ink, it’s not only essential to use high-quality UV inks and advanced printing equipment, but also to meticulously adjust and optimize printing parameters, light source settings, ink viscosity, and post-processing techniques.


Detailed Explanation of the Construction Process for UV Inks

The UV ink application process is a complex and meticulous task, in which every step is crucial and directly affects the quality and appearance of the printed materials. By carrying out scientific and standardized pre-press preparation, printing operations, UV curing, and post-processing procedures, we can fully harness the outstanding performance of UV inks and achieve high-quality print outputs.


Requirements for UV Ink Printing Equipment

To ensure smooth UV ink printing and achieve high-quality printed materials, a series of specialized, high-performance equipment and components are particularly crucial. This article will provide a detailed introduction to key components such as UV curing equipment, doctor blades, rubber blankets, gripper bars, printing plates and plate cylinders, ink supply systems, and environmental control systems, exploring their important roles and characteristics in UV ink printing.