Multifunctional UV monomer


Today, we’re introducing polyfunctional UV monomers. Compared to mono- and di-functional UV monomers, polyfunctional UV monomers may have poorer dilution properties; however, they offer advantages such as low odor, low skin irritation, and fast curing speed, thereby partially offsetting the shortcomings of mono- and di-functional UV monomers. Polyfunctional UV monomers refer to those containing three or more reactive functional groups capable of participating in the curing reaction.

Due to the increased content of functional groups, polyfunctional UV monomers typically exhibit the following characteristics.

1. Low odor

Because polyfunctional UV monomers generally have a larger molecular weight, they exhibit low volatility and low odor.

2. High viscosity and poor dilutability.

3. Fast curing speed

Due to the presence of multiple functional groups, these UV monomers can rapidly polymerize under ultraviolet light irradiation to form a crosslinked network.

4. The cured film has high hardness but high brittleness.

This is because each molecule contains multiple reactive groups, resulting in a high cross-linking density in the photopolymerized product.

5. High curing shrinkage and poor adhesion to the substrate.

The following introduces some common polyfunctional UV monomers.

I. TMPTA Series

TMPTA, trimethylolpropane triacrylate.

TMPTA features rapid curing speed, high gloss, high hardness, and high cross-linking density. Its cured film is hard but somewhat brittle. It is inexpensive and currently the most widely used polyfunctional UV monomer.

TMPTMA, trimethylolpropane trimethacrylate.

Compared to TMPTA, TMPTMA has one additional methyl group on its double bond, resulting in a slower curing speed than TMPTA. However, the cured film of TMPTMA is harder than that of TMPTA, and its viscosity is significantly lower than that of TMPTA.

3EO-TMPTA, 9EO-TMPTA, 15EO-TMPTA, ethoxylated trimethylolpropane triacrylate.

As the number of ethoxylated groups increases, the cured film exhibits greater flexibility, reduced skin irritation, and enhanced water solubility. Starting December 1, 2023, the European Chemicals Agency has classified TMPTA as a Category 2 carcinogen. The urgent need to find alternatives to TMPTA is now more pressing than ever. Ethoxylated TMPTA has emerged as one promising alternative.

3PO-TMPTA, propoxylated trimethylolpropane triacrylate.

Compared to ethoxylated TMPTA, propoxylated TMPTA not only enhances the flexibility of the cured film and reduces skin irritation, but also improves its water resistance due to the introduction of propoxylated groups.

II. PET3A: Pentaerythritol Triacrylate

The molecular structure of PET3A contains hydroxyl groups, which help enhance substrate adhesion and can also react with NCO groups to form polyurethane acrylates. During its synthesis, due to difficulties in separation, the final product of PET3A often contains impurities of PET4A. PET3A exhibits some crystallinity at low temperatures but becomes transparent upon heating. It cures rapidly, forming a hard and brittle cured film with excellent chemical resistance.

III. GPTA: Propoxylated Glycerol Triacrylate

GPTA features fast curing speed, excellent flexibility, low irritation, and good pigment wetting properties.

IV. THEICTA: Tri(2-hydroxyethyl) isocyanurate triacrylate

THEICTA is a white, wax-like solid at room temperature, with a high glass transition temperature (Tg), high reactivity, and excellent thermal stability. Its unique isocyanurate structure provides outstanding wear resistance.

5. PET4A: Pentaerythritol tetraacrylate

PET4A cures faster than PET3A, has a higher crosslink density, and exhibits greater hardness.

6. Di-TMPTA: Bis-trimethylolpropane tetraacrylate

It has high viscosity, fast curing speed, and a high cross-linking density. The cured film is hard yet not brittle, with excellent chemical resistance and abrasion resistance. In formulations, it is primarily used to enhance the photopolymerization rate and cross-linking density.

7. DPHA: Pentaerythritol hexaacrylate

High viscosity, high reactivity, high cross-linking density, high hardness, and excellent wear resistance—commonly used in formulations designed to enhance hardness and wear resistance.

The above are common polyfunctional UV monomers.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News