The “Two-Gun Hero” of the Alcohol Family


Alcohols are like little elves of the organic world, with their hydroxyl hands firmly gripping the carbon atoms on the side chains of hydrocarbon groups or benzene rings—just as if they were holding onto the latest trend in the chemical realm.

Based on the type of hydrocarbon group, alcohols can be classified into fatty alcohols and aromatic alcohols—much like chemical twins, one hailing from the fatty family and the other from the aromatic family, yet both sharing the same alcoholic heritage. According to the type of carbon atom to which the hydroxyl group is attached, alcohols can be further divided into primary alcohols, secondary alcohols, and tertiary alcohols—three brothers within the alcohol family, each playing a distinct role. Based on the number of hydroxyl groups present in the molecule, alcohols can be categorized as monohydric alcohols, dihydric alcohols, and trihydric alcohols—akin to the Three Musketeers of the alcohol world, where each member is more versatile than the last. The number of hydroxyl groups determines their performance capabilities on the chemical stage.

On the stage of polyurethane acrylate synthesis, long-chain diols are indispensable stars. They’re the “double-gun heroes” of the alcohol family—each molecule carries two “hydroxyl pistols” (-OH), always ready to engage in chemical reactions and “duel” with other molecules. The two major factions of these “double-gun heroes” are polyether diols and polyester diols. Speaking of polyether diols, this family is quite extensive, encompassing members such as polyethylene glycol, polypropylene glycol, ethylene oxide-propylene oxide copolymers, and polytetrahydrofuran diols, among others. These little fellows share one common trait: their ether bonds have low cohesive energy, making them a group of gentle, “soft and cute” chemical substances. Precisely because of this, polyurethane acrylates made from polyether diols boast exceptionally high flexibility—almost like gymnasts crowned champions in the chemical world! However, if methyl groups appear as side chains in the polyether, it’s as if a master of jujutsu suddenly dons armor, drastically reducing its flexibility. Polyethylene glycol, in particular, stands out as the ultimate champion of flexibility; polyurethane acrylate films made from it are simply unbeatable in terms of flexibility! Still, this little guy has its own quirks: its molecular weight shouldn’t be too large—around several hundred is just right. Otherwise, the resulting polyurethane acrylate would become like a water-averse doll, not only suffering from poor water resistance but also exhibiting inferior mechanical strength.

Polyester diols are produced by the polycondensation of dicarboxylic acids and diols, or they can be derived from polycaprolactone diols. Polyesters generally exhibit high mechanical strength. Polyurethane-acrylate curing films based on polyester diols boast exceptional tensile strength, modulus, and heat resistance—qualities that make other materials envious. Thanks to the stronger bonding effect of ester groups compared to ether linkages, PUAs made from polyester diols have significantly higher viscosities than their polyether-based counterparts, resulting in superior adhesion to substrates. However, polyester diols have a minor drawback: they react with alkalis as if the alkali were their archenemy, readily undergoing hydrolysis. Consequently, polyester-based polyurethane-acrylates tend to have poorer alkali resistance.

Long-chain diols and isocyanates polymerize to form polyurethanes, and the performance of polyurethane acrylates largely depends on the properties of these polyurethanes. When the molecular weight is sufficiently high, even in the absence of chemical crosslinking, the numerous urethane N-H bonds tend to "huddle together for warmth," forming hydrogen bonds. These "molecular microgroups" endow polyurethanes with numerous physical crosslinking points. Moreover, the presence of long-chain diol units within the molecule further enhances the polyurethane's exceptional softness. At this point, a microphase separation between "soft segments" and "hard segments" is established within the polyurethane. The hard-segment microdomains, resembling the "muscles" of the polyurethane, are composed of urethane bonds, while the soft-segment microdomains serve as the "soft regions," providing flexibility. This unique soft-hard microphase separation imparts many distinctive properties to polyurethanes, including outstanding flexibility, high shear and tensile strength, and excellent wear resistance.

As a manufacturer of light-curable resins, Bosheng New Materials has launched numerous types of polyurethane acrylates.

B-39, a monofunctional polyurethane acrylate, features low viscosity and excellent flexibility. It is recommended for systems with high solids content and low viscosity, where high flexibility of the cured film is required.

B-221, a di-functional polyurethane acrylate with fast curing and excellent resistance to boiling water, is recommended for use as a UV primer in vacuum plating and as a UV topcoat for plastics.

B-371, a trifunctional polyurethane acrylate, features fast curing, excellent surface drying, and good flexibility. It is recommended for use in snowflake UV inks and wrinkle UV inks.

B-609, a hexfunctional polyurethane acrylate with high hardness, excellent abrasion resistance, and chemical resistance, is recommended for use in UV varnishes and vacuum-plated UV topcoats.

B-919B, a nine-functional polyurethane acrylate with excellent toughness, wear resistance, and chemical resistance; recommended for use as a UV topcoat in vacuum plating applications.

In addition to the product models listed above, Boxing New Materials offers specialized custom-made services. We welcome your inquiries and invite you to request samples for testing.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News