Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Flow additives for different application systems
Release time:
2024-12-13 17:01
A leveling agent is a commonly used coating additive whose primary function is to help the coating form a smooth, glossy, and uniform film during the drying and film-forming process. It significantly influences the coating’s leveling properties, gloss level, and overall performance. Different coating systems—due to their varying compositions, intended applications, and construction environments—have different requirements for leveling agents. Therefore, selecting the right leveling agent is crucial for optimizing coating performance.
I. Solvent-Based Coating Systems
In solvent-based coating systems, the selection of leveling agents is primarily based on their ability to adjust the surface properties and viscosity of the paint film. Common solvent-based leveling agents consist of mixtures of high-boiling-point solvents with relatively slow evaporation rates, which can slow down the drying speed of the coating film and keep its surface in a moist state. Depending on their chemical structures, leveling agents used in solvent-based coating systems can be categorized as follows:
1. Silicone-based leveling agents: These leveling agents can significantly reduce the surface tension of coatings and enhance their wettability on substrates, thereby improving the flow and leveling properties of the coating film. Silicone leveling agents can be broadly categorized into three types: polydimethylsiloxane, polymethylalkylsiloxane, and organically modified polysiloxanes. Among these, organically modified polysiloxanes are the most widely used.
2. Acrylic Leveling Agents: Acrylic leveling agents primarily achieve controlled leveling by modulating molecular weight and polarity. These agents include pure acrylic leveling agents and modified acrylic leveling agents. Pure acrylic leveling agents can balance surface tension differences on the coating film with only a slight reduction in the coating’s surface tension; however, they carry the risk of causing haze and reducing surface hardness. In contrast, modified acrylic leveling agents—such as fluorine-modified acrylic leveling agents and phosphate-ester-modified acrylic leveling agents—can significantly lower the coating’s surface tension while maintaining excellent substrate wetting properties alongside their leveling performance.
3. Fluorocarbon-based leveling agents: These leveling agents offer highly effective performance but are expensive. They are typically used when acrylic leveling agents and silicone leveling agents fail to deliver satisfactory results. However, these leveling agents also tend to stabilize foam and may affect interlayer adhesion.
II. Powder Coating Systems
Powder coatings contain no solvents and do not generate surface tension gradients during film formation; therefore, leveling is more closely related to the substrate’s wettability. The leveling process of powder coatings consists of two stages: melting of powder particles and subsequent flow of the melted particles into a smooth coating film. In powder coating systems, commonly used leveling agents include acrylic-based leveling agents and silicone-based leveling agents.
1. Acrylic leveling agents: Acrylic leveling agents are commonly used in powder coatings. If the leveling agent is liquid, it should be pre-compounded into masterbatches before use. There are also acrylic leveling agents available in powder form, specifically designed for use in powder coatings. These products adsorb liquid acrylic leveling agents onto silica powder.
2. Silicone-based leveling agents: If the powder coating needs to be smooth and anti-sagging, a silicone leveling agent should be used. There are silicone leveling agents specifically designed for powder coatings. When using silicone leveling agents, care should be taken to avoid pinholes.
III. Waterborne Coating Systems
Water-based coating systems are divided into water-soluble systems and latex systems. In these two types of systems, the selection and use of leveling agents also differ.
1. Water-soluble systems: In water-soluble systems, it is necessary to significantly reduce the surface tension of the system. Therefore, commonly used leveling agents are silicone-based leveling agents and fluorocarbon-based leveling agents. Their functions are identical to those in solvent-borne coating systems. If a truly smooth surface is required, acrylic leveling agents can also be added.
2. Latex Systems: The film-forming mechanism of latex systems is entirely different, and their viscosity does not change as the solvent evaporates. In latex systems, the use of leveling agents can enhance the substrate wetting properties of the coating. Acrylic leveling agents can improve the smoothness of the paint film; however, the coating’s primary flow characteristics are more effectively controlled and adjusted by adding rheology modifiers.
IV. Selection in Different Paint Film Formulations
1. Primer and Mid-Coat Formulations: Acrylic leveling agents are typically used. If degassing performance and substrate wetting are required, it is advisable to select acrylic leveling agents with medium or high molecular weights. In primers, if stronger substrate wetting is needed, consider using silicone leveling agents and modified acrylic leveling agents that can significantly reduce surface tension (such as fluorine-modified acrylic leveling agents and phosphate-ester-modified acrylic leveling agents). If silicone leveling agents and fluorine-modified acrylic leveling agents cause side effects like foam stabilization or impaired interlayer adhesion, phosphate-ester-modified acrylic leveling agents should be employed instead.
2. Formulation for topcoats and clear coats: When relatively high demands are placed on the appearance of the coating film, it is generally advisable to use low-molecular-weight acrylic leveling agents. This approach ensures excellent leveling properties and reduces the likelihood of haze formation in the coating film.
3. Crosslinking and Curing Systems: Using acrylic leveling agents containing reactive functional groups often yields better leveling performance while also enhancing the physical and chemical properties of the coating film. If the coating film needs to exhibit improved flowability, smoothness, and scratch resistance, silicone leveling agents are essential. In such cases, it is best to use silicone leveling agents in combination with acrylic leveling agents. When applying coatings on vertical surfaces, silicone leveling agents not only provide excellent leveling performance but also effectively reduce the tendency for the coating to sag or drip.
V. Summary
In summary, the selection and use of leveling agents in different application systems must be determined based on the properties of the coating, the construction conditions, and the requirements for the coated film. When choosing a leveling agent, one should take into full account factors such as its chemical structure, compatibility, volatility, and impact on the performance of the coated film.
Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly.
Share to:
Related News
What are the chemical-action leveling agents?
A leveling agent, also known as a surfactant, is a chemical substance that can reduce the surface tension of liquids and improve their surface properties. Typically composed of a hydrophobic group and a hydrophilic group, these agents adsorb onto the liquid surface to form a molecular layer, thereby lowering the surface tension of the liquid. Leveling agents are widely used additives in fields such as coatings, inks, and adhesives. They enable these substances to form a uniform film on surfaces and impart excellent gloss and smoothness.
What are the physical-action leveling agents?
In the coatings industry, leveling property is one of the key indicators for assessing the quality of a coating. It directly affects the smoothness and glossiness of the coated surface, thereby influencing the aesthetic appeal and durability of the final product. To enhance the leveling property of coatings, the industry has developed a series of leveling agents. Among these, physically acting leveling agents have attracted considerable attention due to their unique physical mechanisms and broad range of applications. These leveling agents achieve improved leveling by adjusting the viscosity, leveling time, or surface properties of the coating—without undergoing any chemical reactions with the coating system itself.
Resins with Various Curing Methods (Part 2)
Resin materials have attracted considerable attention due to their unique properties and wide range of applications. As a crucial step in the application of resin materials, resin curing technology plays an important role in enhancing material performance and expanding its application fields. In the previous issue, we discussed two major types of resin curing technologies: UV-curable resins and visible-light-curable resins. In addition to these, this article will introduce three other distinct types of resin curing technologies—IR-curable resins, thermally cured resins, and water-curable resins. Each of these curing technologies has its own distinctive features and is suited to different application scenarios, offering greater flexibility and more possibilities for the use of resin materials.