Oligomers in Light-Curing Technology


Light-curing technology is an efficient, energy-saving, and environmentally friendly manufacturing process that uses ultraviolet or visible light of specific wavelengths to rapidly solidify liquid resins into solid materials. This technology is widely used in fields such as coatings, inks, adhesives, and 3D printing materials. As one of the key components of light-curable products, oligomers directly influence the quality and performance of these products.

I. Definition and Characteristics

In light-curing systems, oligomers—also known as prepolymers or oligomeric compounds—are an essential component. Oligomers are macromolecular compounds composed of a relatively small number of repeating units linked together by covalent bonds; their molecular weights fall between those of small molecules and high polymers. During the light-curing process, oligomers typically possess functional groups that can undergo further reactions or polymerization upon exposure to light, such as C=C double bonds and epoxy groups. Under the action of a photoinitiator, these functional groups can initiate either free-radical polymerization or cationic polymerization, thereby forming a polymeric network structure and achieving the curing of the coating.

II. The Role of Oligomers in Photocuring

Oligomers are the main component of UV-curable products, typically produced by polymerization reactions from monomers. Their relative molecular mass falls between that of small molecules and high polymers. In UV curing, oligomers primarily play the following roles:

1. Providing the basic skeleton: Oligomers are the main components of light-curable resins. They are interconnected through photoinitiated polymerization reactions, forming the basic skeleton of the cured product. This skeletal structure determines the cured product’s fundamental physical properties, such as hardness, toughness, abrasion resistance, and heat resistance.

2. Influence on Curing Rate: The molecular structure and types of functional groups in oligomers directly affect the rate of photocuring reactions. For example, oligomers containing unsaturated double bonds (such as acryloyloxy and methacryloyloxy groups) can rapidly initiate polymerization upon exposure to ultraviolet light, thereby causing the resin to cure.

The higher the content of functional groups in an oligomer, the faster the curing rate typically is. However, excessively high functional-group content may also make the system overly reactive and difficult to control. In addition, the molecular weight of the oligomer also affects the curing rate: when the molecular weight is moderate, it facilitates the diffusion and contact of reactant molecules, thereby enhancing the curing efficiency.

3. Adjusting Viscosity: The molecular weight, molecular structure, and distribution of functional groups in oligomers directly influence their viscosity. By adjusting the molecular weight and molecular structure of oligomers, it is possible to prepare photocurable resins with varying viscosities, thereby meeting the requirements of different application methods.

4. Affects optical performance

The structure of oligomers significantly influences the optical properties of the cured products. For example, oligomers containing aromatic rings tend to enhance the transparency and refractive index of the cured products, which is particularly crucial for the preparation of optical coatings and lenses. Moreover, the purity of the oligomers, their impurity levels, and side reactions occurring during the curing process can also affect the light transmittance and color of the cured products.

5. Improving Performance: Oligomers can enhance the performance of UV-curable products by introducing various functional groups and side chains. For example, incorporating functional groups such as UV absorbers or antioxidants can effectively improve the cured product’s resistance to ultraviolet light and oxygen, thereby extending its service life. Meanwhile, the crosslinking density and chain segment structure of oligomers also influence the cured product’s resistance to solvents and chemicals.

III. The Impact of Light Curing on the Properties of Oligomers

The photopolymerization process significantly affects the properties of oligomers, primarily in the following aspects:

1. Degree of Curing: During the photopolymerization process, oligomers undergo a polymerization reaction to form a high-molecular-weight network structure. The higher the degree of curing, the more stable the product’s performance will be. The degree of curing is influenced by factors such as the type and dosage of the photoinitiator, light intensity, and irradiation time.

2. Crosslinking Density: During the photocuring process, oligomer molecules are interconnected via chemical bonds to form a crosslinked network. The higher the crosslinking density, the better the resulting product’s hardness, heat resistance, and chemical resistance. However, excessively high crosslinking density may lead to increased brittleness of the product, thereby compromising its performance.

3. Residual Stress: During the photopolymerization process, oligomer molecules undergo contraction as they polymerize, leading to the development of residual stress within the product. Excessive residual stress can compromise the dimensional stability and service life of the product.

4. Aging Performance: During use, light-cured products are affected by environmental factors such as illumination, temperature, and humidity, which can lead to a decline in their performance. The molecular structure of oligomers and the types of functional groups they contain significantly influence their aging performance. By incorporating additives such as antioxidants and UV absorbers, the aging resistance of these products can be enhanced.

IV. Types and Applications

There are many types of oligomers used in UV curing. Classified according to the functional groups present during synthesis, they mainly include unsaturated polyester-based, epoxy-based, polyurethane-based, polyester-based, amino-based, polyether-based, organosilicon-based, and phosphate ester-based oligomers. These oligomers find extensive applications in fields such as UV-curable coatings, inks, and adhesives.

V. Conclusion

In summary, oligomers play a crucial role in light-curing systems as they are an essential component of these systems. They possess unique structures and properties that make them indispensable in the light-curing process. By carefully selecting the type and dosage of oligomers, it is possible to optimize the performance and application effects of light-curing coatings.

Disclaimer: The above content is sourced from the internet and is for reference purposes only. If any infringement occurs, please contact us, and we will remove the content immediately. 

Share to:

Related News


How to Use Polymers to Prepare Oligomers

Oligomers—also known as oligomeric or low-molecular-weight polymers—are partially polymerized substances whose physicochemical properties vary depending on their molecular weight. There are various methods for synthesizing oligomers; one of these involves using high-molecular-weight polymers as starting materials, specifically by degrading such polymers to produce oligomers. High-molecular-weight polymers, a class of macromolecular compounds composed of numerous repeating units linked by covalent bonds, play a crucial role in daily life, industrial production, and scientific research. However, with the extensive use and disposal of high-molecular-weight polymers, environmental pollution has become an increasingly prominent issue. Degradation of high-molecular-weight polymers into oligomers not only helps reduce environmental pollution but also opens up new avenues for the preparation of oligomers.


Synthesis methods for oligomers

Oligomers are compounds formed during a reaction process through condensation reactions involving multiple monomer molecules. They typically exhibit moderate molecular weights but have lower relative molecular masses compared to high-molecular-weight polymers. Due to their smaller molecular weights, oligomers display unique physicochemical properties that endow them with broad application potential. There are various methods for synthesizing oligomers, including polycondensation reactions, polymerization reactions, and ring-opening polymerization. Different synthesis methods are suitable for different raw materials and conditions, enabling the preparation of oligomers with diverse structures and properties.


What is an oligomer?

Oligomers, also known as oligomeric compounds or low polymers, are a class of macromolecular compounds composed of a small number of structural units linked together by covalent bonds. Compared to high-molecular-weight polymers, oligomers have lower molecular weights—typically ranging from several hundred to several thousand daltons—and relatively low degrees of polymerization (i.e., the number of structural units), usually between a few and several dozen.