Vacuum plating


Vacuum coating is an important aspect of the vacuum technology field. Based on vacuum technology, it employs physical or chemical methods and incorporates a range of advanced technologies—including electron beams, molecular beams, ion beams, plasma beams, radio frequency, and magnetron sputtering—to provide a new process for preparing thin films, serving both scientific research and practical production. Simply put, vacuum coating refers to a method in which metals, alloys, or compounds are evaporated or sputtered in a vacuum environment, causing them to condense and deposit onto a substrate—also known as the base material, substrate, or matrix.

As is well known, by depositing a thin film onto the surface of certain materials, it is possible to endow those materials with numerous new and improved physical and chemical properties. In the 1970s, the primary methods for coating surfaces involved electroplating and chemical plating. The former relies on passing an electric current through an electrolyte, causing the ions in the electrolyte to be deposited onto the substrate, which serves as the other electrode. Consequently, this method requires the substrate to be an excellent electrical conductor, and it also proves difficult to precisely control the thickness of the deposited film. The latter method employs chemical reduction, necessitating that the coating material be formulated into a solution capable of rapidly participating in a reduction reaction. Not only does this approach result in poor adhesion strength of the film, but it also leads to uneven and hard-to-control coatings. Moreover, it generates large volumes of waste liquid, causing severe environmental pollution. As a result, these two coating processes—commonly referred to as wet coating methods—have been significantly constrained.

Product Recommendation:

 Vacuum plating

 

Electroplating Primer Performance Requirements:

 

 Electroplating Primer Performance Requirements:

 

UV Electroplating Primer Formulation Approach:

 V Electroplating Primer Formulation Approach:

Examples of UV Electroplating Primer Formulations (—):

 Example Formulation of V Electroplating Primer (—):

 

 

Example Formulation of UV Electroplating Primer (Part 2):

 Vacuum plating  Example Formulation of UV Electroplating Primer (Part 2):

Example Formulation of UV Electroplating Primer (Part 3):

 Example Formulation of UV Electroplating Primer (Part 2):

Example Formulation of UV Electroplating Primer (4):

 Example Formulation of UV Electroplating Primer (Part 2):

 

 

UV Electroplating Topcoat Performance Requirements:

 

 UV Electroplating Topcoat Performance Requirements:

 

UV Electroplating Topcoat Formulation Approach:

 UV Electroplating Topcoat Formulation Approach:

Example Formulation of UV Electroplating Topcoat (1):

 Example Formulation of UV Electroplating Topcoat (1):

Example Formulation of UV Electroplated Topcoat (Part 2):

 Example Formulation of UV Electroplated Topcoat (Part 2):

Example Formulation of UV Electroplating Topcoat (3):

 Example Formulation of UV Electroplating Topcoat (3):

Example Formulation of UV Electroplating Topcoat (Part 4):

 Example Formulation of UV Electroplating Topcoat (3):

 

 

UV Electroplating Mid-Coat Performance Requirements:

 

 Vacuum plating

Ideas for the intermediate coating formulation in V-plating:

 Ideas for the intermediate coating formulation in V-plating:

Example Formulation for UV Electroplating Intermediate Coat (1):

 Example Formulation for UV Electroplating Intermediate Coat (1):

Example Formulation for UV Electroplating Intermediate Coat (Part 2):

 Example Formulation for UV Electroplating Intermediate Coat (1):

Share to:

Related News


Glossy paper

Gloss coatings for paper are varnishes used for coating and decorating book and magazine covers, advertising posters, outer packaging cartons for goods, decorative paper bags, and other similar applications, thereby enhancing the aesthetic appeal of the coated surfaces. Previously, the conventional method of applying a gloss finish to paper involved adhering a layer of polyethylene or polypropylene film onto the paper surface. The application process included steps such as glue coating and film lamination, followed by a waiting period for the interlayer adhesive to cure. Overall, this method featured low production efficiency, higher technical requirements for application, and uncertain durability of the plastic film, especially when the products were intended for long-term use.


UV-curable coating

UV-curable coatings are a new type of coating that gained popularity in Europe, the United States, Japan, and other regions at the end of the 20th century. Initially used for surface finishing of furniture, flooring, mobile phones, and portable audio player casings, their application has now expanded further to include cosmetic containers, household appliances such as televisions, mobile phones, and computers, as well as other sectors like motorcycles and clear-coat finishes.


Common Issues and Solutions for UV Coatings

UV varnish is a transparent coating, sometimes referred to as UV lacquer. After being sprayed or rolled onto the substrate surface and exposed to UV light, it transforms from a liquid state into a solid state, thereby hardening the surface. This coating offers excellent scratch and abrasion resistance, while also giving the surface a glossy, aesthetically pleasing appearance with a smooth, rounded texture. However, during use, certain issues frequently arise. Below are some common problems and their corresponding solutions.