News

Company News

Application Mind Map

Test Report

Technical Article

Industry News

Solutions for Defects in UV Wood Coatings (Part 3)

Release time:

2026-03-18 07:28

Solutions for Defects in UV Wood Coatings (Part 3)

In the industrial coating process for UV wood coatings, although roller application is the preferred method for flat-panel wood products due to its high efficiency and uniform film-forming capability, several common defects still arise during production—most notably roller marks—which significantly compromise the aesthetic quality of the finished product. This paper provides a detailed discussion of solutions to the issue of roller marks in UV wood coatings and briefly outlines strategies for addressing other related defects.

I. Maintenance and Calibration of Mechanical Precision

1. Regularly inspect the geometric accuracy of the rollers: Over long-term operation, coating rollers and metering rollers may experience uneven wear or slight bending, resulting in an inconsistent linear pressure distribution at the contact interface with the web. It is recommended to establish a routine inspection regime, using specialized tools to measure the roundness and straightness of the rollers, and to promptly repair or replace any components found to be out of tolerance. For rollers that have already sustained significant wear, precision grinding should be employed to restore their geometric accuracy, thereby ensuring uniform contact pressure across the entire roller surface.

2. Controlling roller runout: Wear of the roller bearings or eccentric mounting can cause radial runout, resulting in periodic impacts on the wet film during rotation. The condition of the bearings should be inspected regularly, and worn bearings replaced promptly. During roller installation, ensure that concentricity meets the specified requirements by using a dial indicator to measure and adjust the roller runout, keeping it within the permissible tolerance. For coating lines with high precision requirements, high-precision bearings can be selected, and a tapered-fit mounting method can be employed to minimize the impact of runout.

II. Ensuring the Stability of the Feeding System

1. Eliminate metering pump pulsation: If the metering pump supplying paint between the rollers exhibits excessive pulsation, it can cause periodic fluctuations in the amount of paint accumulated at the nip. It is recommended to select a metering pump type with low pulsation, or to install a damper or pulsation absorber at the pump outlet to smooth the paint delivery flow. For existing metering pumps, the pump seals and valve conditions should be inspected regularly to ensure stable operation.

2. Maintain clean roll gaps: If dried paint particles or contaminants become lodged in the gap between the leveling roller or coating roller, they can locally widen the gap, resulting in longitudinal, through-going thick marks on the sheet. A standardized cleaning procedure should be established, with thorough cleaning of the rollers and roll gaps at the end of each shift. During production, if any foreign matter is detected entering the system, the machine must be stopped immediately for cleaning to prevent the continuous occurrence of defects. A filtration device can also be installed at the inlet of the paint supply system to trap impurity particles that might otherwise enter the roll gap.

III. Optimization of Coating Transfer Performance

1. Optimizing coating wetting performance: Poor wetting of UV coatings on the roller surfaces can lead to unstable transfer efficiency during the process of transferring the coating from the metal roller to the rubber roller and then from the rubber roller to the substrate, resulting in localized stringing or buildup. It is recommended to select a coating system with excellent wetting properties or to incorporate an appropriate amount of wetting and leveling additives into the formulation to improve the spreading behavior of the coating on the roller surfaces. For established coating formulations, transfer characteristics can be improved by adjusting the application viscosity—while maintaining the desired coating thickness, reducing the viscosity slightly can enhance flowability.

2. Matching roller material and surface condition: Rollers made of different materials exhibit varying adsorption and release characteristics for coatings. The appropriate hardness and surface roughness of the rubber rollers should be selected based on the properties of the coating. The roller surface must be kept clean and properly polished; an excessively smooth surface may result in insufficient transfer, while an overly rough surface may compromise the uniformity of the paint film. The roller surface should be inspected regularly, and any rollers showing signs of aging, hardening, or damage should be replaced promptly.

IV. Precise Setting of Process Parameters

1. Properly set the nip gap and roller speeds: The gap between the coating roller and the metering roller determines the coating film thickness and should be precisely adjusted according to product specifications. The speed ratio between the rollers affects the efficiency of paint transfer; excessively high speeds may result in incomplete transfer, while excessively low speeds can reduce production efficiency. It is recommended to determine the optimal parameter combination through process trials and maintain these settings consistently during production.

2. Control of coating thickness uniformity: The paint supply rate should be kept constant to prevent variations in coating thickness caused by fluctuations in the paint level. An automated paint supply system combined with a liquid-level control device can be used to ensure stable paint delivery between rollers. For manual paint replenishment, standardized operating procedures should be established to minimize human error.

V. Conclusion

Roll marks are the visible manifestation of periodic fluctuations in coating film thickness during the coating process, with their root causes spanning mechanical precision failures, feed system variability, and poor paint transfer efficiency. Only through comprehensive efforts—including maintenance and calibration of mechanical precision, assurance of feed system stability, optimization of paint transfer performance, precise setting of process parameters, and systematic quality control across the entire production process—can roll mark defects be fundamentally eliminated, yielding a smooth and uniform coated surface. A deep understanding of the mechanisms underlying roll mark formation, coupled with systematic process optimization, will enable enterprises to achieve the dual objectives of stable quality and enhanced efficiency in roll coating production, delivering high-quality products that truly stand up to rigorous inspection.

Disclaimer: The above content is sourced from the internet and is provided for reference only. If any infringement occurs, please contact us, and we will remove it promptly.

Boxing Recommended Products – UV Wood Coatings
Putty primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Sanding primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Apply primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-02	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-05	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-535	Polyester acrylate	Excellent adhesion, rapid curing, good flexibility, and yellowing resistance.
B-546	Polyester acrylate	Good adhesion, fast curing, and excellent flexibility.
White primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-529	Polyester acrylate	Good adhesion, low shrinkage, and excellent resin compatibility.
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
Gloss topcoat
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-21C	Active amine photosensitizing promoter	Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate
B-301	Aromatic Polyurethane Acrylate	Fast curing, good toughness, and excellent grindability.
B-302	Aromatic Polyurethane Acrylate	Fast curing, high strength, good toughness, and excellent grindability.
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-601	Aromatic Polyurethane Acrylate	High hardness, scratch resistance, chemical resistance, and excellent cost performance.
B-609	Aliphatic polyurethane acrylate	Fast curing, high hardness, scratch resistance, and chemical resistance.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-910A2	Aliphatic polyurethane acrylate	Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Matte topcoat
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-21C	Active amine photosensitizing promoter	Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate
B-328M	Aliphatic polyurethane acrylate	Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.
B-328R	Aliphatic polyurethane acrylate	Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.
B-333	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, good wettability, and good flexibility.
B-572	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-650A	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, fast curing, and good wettability.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-910A2	Aliphatic polyurethane acrylate	Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Bright White Finish
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-301	Aromatic Polyurethane Acrylate	Fast curing, good toughness, and excellent grindability.
B-302	Aromatic Polyurethane Acrylate	Fast curing, high strength, good toughness, and excellent grindability.
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-601	Aromatic Polyurethane Acrylate	High hardness, scratch resistance, chemical resistance, and excellent cost performance.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Adherent
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-05	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-509B	Polyester acrylate	Good adhesion, good flexibility, and excellent pigment wetting.
B-531	Polyester acrylate	Good adhesion, impact resistance, excellent flexibility, and yellowing resistance.
B-535	Polyester acrylate	Excellent adhesion, rapid curing, good flexibility, and yellowing resistance.
B-546	Polyester acrylate	Good adhesion, fast curing, and excellent flexibility.
B-590	Polyester acrylate	Excellent adhesion, rapid curing, and good pigment wetting.
Filler type
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-529	Polyester acrylate	Good adhesion, low shrinkage, and excellent resin compatibility.
Color correction
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
Harden
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-301	Aromatic Polyurethane Acrylate	Fast curing, good toughness, and excellent grindability.
B-302	Aromatic Polyurethane Acrylate	Fast curing, high strength, good toughness, and excellent grindability.
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-601	Aromatic Polyurethane Acrylate	High hardness, scratch resistance, chemical resistance, and excellent cost performance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Matte
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-328M	Aliphatic polyurethane acrylate	Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.
B-328R	Aliphatic polyurethane acrylate	Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.
B-329D	Aliphatic polyurethane acrylate	Low irritation, low viscosity, excellent wettability, and a pleasant feel.
B-333	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, good wettability, and good flexibility.
B-650A	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, fast curing, and good wettability.
Solid-color paint
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-519	Self-curing polyester acrylate	Self-initiated photopolymerization performance
B-530	Polyester acrylate	Low viscosity, excellent hydrophobicity, thixotropy, and improved ink misting
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
Yellowing resistance
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-431	Cycloaliphatic Specialty Acrylates	Yellowing resistance, excellent wettability, low viscosity, and fast curing
Dip coating
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
Roll coating
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-100	Bisphenol A epoxy acrylate	High hardness, high gloss, excellent chemical resistance, and high fullness.
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Solvent-free spraying
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-251	Aromatic Polyurethane Acrylate	Fast curing, excellent flexibility, and good wetting of black ink pigments.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
LED-UV
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-21C	Active amine photosensitizing promoter	Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate
B-241	Aliphatic polyurethane acrylate	Fast curing, excellent skin feel, and yellowing resistance.
B-27	Active amine photosensitizing promoter	Low color number, benzene-free, low odor, antioxidant and anti-polymerization
B-570	Polyester acrylate	Low viscosity, benzene-free, low odor, suitable for LED UV
B-574	Polyester acrylate	Benzene-free, low odor, and VOC levels meet cigarette pack standards.
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
Excimer lamp
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-241	Aliphatic polyurethane acrylate	Fast curing, excellent skin feel, and yellowing resistance.
Skin feel
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-241	Aliphatic polyurethane acrylate	Fast curing, excellent skin feel, and yellowing resistance.
B-328M	Aliphatic polyurethane acrylate	Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.
B-328R	Aliphatic polyurethane acrylate	Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
Single-item recommendation
Product Model/English Abbreviation	Product Name/Product Type	Product Features
BM2223/TPGDA	Di(propylene glycol) diacrylate	Good flexibility and low volatility
BM2224/EO-HDDA	Ethoxylated 1,6-hexanediol diacrylate	Good adhesion to plastics, good dilutability, and low volatility.
BM3231/TMPTA	Trimethylolpropane triacrylate	High crosslink density, high hardness, high gloss, and excellent wear resistance.
BM3235/PET3A	Pentaerythritol triacrylate	Fast curing, high crosslink density, high hardness, and excellent chemical resistance.
BM3380/3EO-TMPTA	Tripropylene Glycol Triacrylate	More flexible and less irritating than TMPTA.
BM6261/DPHA-80	Dipentaerythritol hexaacrylate	High crosslink density, high hardness, chemical and wear resistance, and water resistance.
BM6263/DPHA-90	Dipentaerythritol hexaacrylate	High crosslink density, high hardness, chemical and wear resistance, and water resistance.

Share to:

Solutions for Defects in UV Wood Coatings (Part 4)

Solutions for Defects in UV Wood Coatings (Part 2)