News

Company News

Application Mind Map

Test Report

Technical Article

Industry News

Solutions for Defects in UV Wood Coatings (Part 1)

Release time:

2026-03-17 16:53

Solutions for Defects in UV Wood Coatings (Part 1)

In modern furniture manufacturing and wood-product finishing, UV wood coatings are widely used due to their unique advantages. However, during the coating process, these coatings often exhibit a serious defect: complete delamination of the entire coating layer, in which the paint film loses all adhesion to the substrate, thereby compromising product appearance and service life. This paper directly addresses solutions to this delamination problem, aiming to help manufacturing enterprises effectively mitigate it.

I. Pre-treatment at the Substrate Level

1. Thoroughly remove grease and wax

Prior to coating, thoroughly clean the substrate surface with a professional cleaning agent to remove grease and wax residues. For stubborn stains, gently sand with fine-grit sandpaper or wipe with a solvent to ensure the substrate surface is clean and free of contamination.

2. Strengthen dust removal processes

After sanding, thoroughly clean the substrate surface. Use high-pressure air blowing or a powerful vacuum system to ensure that fine dust within the wood pores and on the surface is completely removed, thereby preventing the formation of a physical barrier.

3. Control of Wood Chemical Composition

For wood that is rich in tannins or has an abnormal pH, pre-treatment can be carried out before coating, such as applying a sealing primer to isolate harmful substances within the wood. At the same time, wood species with stable chemical properties and good compatibility with UV coatings should be prioritized to reduce the risk of insufficient chemical crosslinking.

II. Construction of Physical Anchors

1. Properly control the sanding fineness

Select the appropriate grit of sandpaper for sanding based on the substrate material and surface condition. Avoid using excessively fine grits, as this can result in a surface that is too smooth, thereby reducing the capillary channels needed for paint penetration. At the same time, ensure even sanding to prevent localized over-sanding.

2. Optimize the fill layer structure

For substrates such as particleboard or medium-density fiberboard, ensure that the surface filler layer is adequate and exhibits strong adhesion. For areas that have already become loose or damaged, localized patching or re-sanding can be employed to reinforce the substrate and enhance the bond between the paint film and the substrate.

III. Chemical Crosslinking Enhancement

1. Primer Curing Control

Strictly control the curing time and energy input of the primer to prevent over-curing, which can lead to surface passivation. By optimizing parameters such as UV lamp power, curing speed, and irradiation distance, ensure that the primer cures to an appropriate degree, thereby providing a robust adhesion foundation for the topcoat.

2. Shorten the interlayer interval time

Arrange the coating sequence rationally to shorten the interval between primer and topcoat application. Apply the topcoat as soon as possible after sanding the primer to minimize the opportunity for moisture, organic volatiles, or dust to adsorb onto the primer surface, thereby preventing the formation of a weak interfacial layer.

3. Material Matching and System Optimization

Select a coating system in which the primer and topcoat have chemically compatible and well-matched properties. Ensure that the topcoat forms strong chemical bonds with the primer to enhance intercoat adhesion. At the same time, rely on technical support and guidance provided by the coating supplier to ensure proper and effective application of the coatings.

IV. Conclusion

The issue of complete film delamination in UV wood coatings is a complex challenge that requires a comprehensive solution. By implementing specific measures to address substrate-related factors, failures in physical anchoring, and deficiencies in chemical crosslinking, coating manufacturers can effectively enhance the coating quality and service life of UV wood finishes. In practical production, companies should place strong emphasis on meticulous detail control and robust process management to ensure that every step is properly executed and closely monitored, thereby delivering high-quality, premium products.

Disclaimer: The above content is sourced from the internet and is provided for reference only. If any infringement occurs, please contact us, and we will remove the content promptly.

Boxing Recommended Products – UV Wood Coatings
Putty primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Sanding primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Apply primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-02	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-05	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-535	Polyester acrylate	Excellent adhesion, rapid curing, good flexibility, and yellowing resistance.
B-546	Polyester acrylate	Good adhesion, fast curing, and excellent flexibility.
White primer
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-529	Polyester acrylate	Good adhesion, low shrinkage, and excellent resin compatibility.
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
Gloss topcoat
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-21C	Active amine photosensitizing promoter	Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate
B-301	Aromatic Polyurethane Acrylate	Fast curing, good toughness, and excellent grindability.
B-302	Aromatic Polyurethane Acrylate	Fast curing, high strength, good toughness, and excellent grindability.
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-601	Aromatic Polyurethane Acrylate	High hardness, scratch resistance, chemical resistance, and excellent cost performance.
B-609	Aliphatic polyurethane acrylate	Fast curing, high hardness, scratch resistance, and chemical resistance.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-910A2	Aliphatic polyurethane acrylate	Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Matte topcoat
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-21C	Active amine photosensitizing promoter	Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate
B-328M	Aliphatic polyurethane acrylate	Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.
B-328R	Aliphatic polyurethane acrylate	Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.
B-333	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, good wettability, and good flexibility.
B-572	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-650A	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, fast curing, and good wettability.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-910A2	Aliphatic polyurethane acrylate	Low viscosity, yellowing resistance, chemical resistance, and steel-wool resistance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Bright White Finish
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-301	Aromatic Polyurethane Acrylate	Fast curing, good toughness, and excellent grindability.
B-302	Aromatic Polyurethane Acrylate	Fast curing, high strength, good toughness, and excellent grindability.
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-601	Aromatic Polyurethane Acrylate	High hardness, scratch resistance, chemical resistance, and excellent cost performance.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Adherent
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-05	Phosphate ester acrylate	Enhances adhesion to substrates such as metal, glass, and plastic.
B-509B	Polyester acrylate	Good adhesion, good flexibility, and excellent pigment wetting.
B-531	Polyester acrylate	Good adhesion, impact resistance, excellent flexibility, and yellowing resistance.
B-535	Polyester acrylate	Excellent adhesion, rapid curing, good flexibility, and yellowing resistance.
B-546	Polyester acrylate	Good adhesion, fast curing, and excellent flexibility.
B-590	Polyester acrylate	Excellent adhesion, rapid curing, and good pigment wetting.
Filler type
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
B-529	Polyester acrylate	Good adhesion, low shrinkage, and excellent resin compatibility.
Color correction
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
Harden
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-301	Aromatic Polyurethane Acrylate	Fast curing, good toughness, and excellent grindability.
B-302	Aromatic Polyurethane Acrylate	Fast curing, high strength, good toughness, and excellent grindability.
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-601	Aromatic Polyurethane Acrylate	High hardness, scratch resistance, chemical resistance, and excellent cost performance.
B-912	Aliphatic polyurethane acrylate	Fast curing, high hardness, good toughness, and excellent chemical and wear resistance.
Matte
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-328M	Aliphatic polyurethane acrylate	Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.
B-328R	Aliphatic polyurethane acrylate	Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.
B-329D	Aliphatic polyurethane acrylate	Low irritation, low viscosity, excellent wettability, and a pleasant feel.
B-333	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, good wettability, and good flexibility.
B-650A	Aliphatic polyurethane acrylate	Low viscosity, excellent matting effect, fast curing, and good wettability.
Solid-color paint
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-519	Self-curing polyester acrylate	Self-initiated photopolymerization performance
B-530	Polyester acrylate	Low viscosity, excellent hydrophobicity, thixotropy, and improved ink misting
B-560	Polyester acrylate	Fast curing and excellent pigment wetting
Yellowing resistance
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-431	Cycloaliphatic Specialty Acrylates	Yellowing resistance, excellent wettability, low viscosity, and fast curing
Dip coating
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
Roll coating
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-100	Bisphenol A epoxy acrylate	High hardness, high gloss, excellent chemical resistance, and high fullness.
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-160D	Modified epoxy acrylate	Good flexibility, yellowing resistance, and excellent adhesion.
B-163	Modified epoxy acrylate	Good flexibility, excellent pigment wetting, and strong adhesion.
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-522	Polyester acrylate	Low shrinkage, excellent flexibility, strong adhesion, and high cost-effectiveness.
Solvent-free spraying
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-251	Aromatic Polyurethane Acrylate	Fast curing, excellent flexibility, and good wetting of black ink pigments.
B-520	Polyester acrylate	Low viscosity, high gloss, excellent wettability, and cost-effective
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
LED-UV
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-21C	Active amine photosensitizing promoter	Low color number, antioxidant and polymerization inhibitor, and enhanced curing rate
B-241	Aliphatic polyurethane acrylate	Fast curing, excellent skin feel, and yellowing resistance.
B-27	Active amine photosensitizing promoter	Low color number, benzene-free, low odor, antioxidant and anti-polymerization
B-570	Polyester acrylate	Low viscosity, benzene-free, low odor, suitable for LED UV
B-574	Polyester acrylate	Benzene-free, low odor, and VOC levels meet cigarette pack standards.
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
Excimer lamp
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-241	Aliphatic polyurethane acrylate	Fast curing, excellent skin feel, and yellowing resistance.
Skin feel
Product Model/English Abbreviation	Product Name/Product Type	Product Features
B-113	Bisphenol A epoxy acrylate	High hardness, high gloss, high fullness, contains 20% TPGDA
B-165	Modified epoxy acrylate	Good flexibility and strong adhesion
B-241	Aliphatic polyurethane acrylate	Fast curing, excellent skin feel, and yellowing resistance.
B-328M	Aliphatic polyurethane acrylate	Low gloss, low viscosity, excellent wettability, and a pleasant hand feel.
B-328R	Aliphatic polyurethane acrylate	Low gloss, excellent matting, good wetting, and a fine, smooth, and silky hand feel.
B-574C	Polyester acrylate	Low viscosity, low odor, excellent wettability; suitable for LED UV.
B-868	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
B-868H	Organosilicon UV-Curable Resin	Excellent leveling, smooth finish, fast curing, and stain resistance.
Single-item recommendation
Product Model/English Abbreviation	Product Name/Product Type	Product Features
BM2223/TPGDA	Di(propylene glycol) diacrylate	Good flexibility and low volatility
BM2224/EO-HDDA	Ethoxylated 1,6-hexanediol diacrylate	Good adhesion to plastics, good dilutability, and low volatility.
BM3231/TMPTA	Trimethylolpropane triacrylate	High crosslink density, high hardness, high gloss, and excellent wear resistance.
BM3235/PET3A	Pentaerythritol triacrylate	Fast curing, high crosslink density, high hardness, and excellent chemical resistance.
BM3380/3EO-TMPTA	Tripropylene Glycol Triacrylate	More flexible and less irritating than TMPTA.
BM6261/DPHA-80	Dipentaerythritol hexaacrylate	High crosslink density, high hardness, chemical and wear resistance, and water resistance.
BM6263/DPHA-90	Dipentaerythritol hexaacrylate	High crosslink density, high hardness, chemical and wear resistance, and water resistance.

Share to:

Solutions for Defects in UV Wood Coatings (Part 2)

Common Defects in UV Wood Coatings (10)