The process of UV-CIPP pipe rehabilitation


The ultraviolet light-curing in-situ pipe rehabilitation technology (UV-CIPP) is an innovative method for underground pipe repair. It employs mechanical pulling to insert a flexible hose pre-impregnated with photosensitive resin into the pipe to be repaired. Compressed air is then used to press the hose tightly against the inner wall of the pipe. Subsequently, ultraviolet light is applied to cure the resin material, thereby creating a strong and durable liner—a new pipe—inside the existing pipeline. The UV-CIPP technology ingeniously combines light-curing technology with the in-situ curing process (CIPP), enabling efficient and precise repairs of damaged or leaking pipes without disturbing the ground surface. This trenchless repair technique significantly enhances repair efficiency and represents a highly effective and environmentally friendly approach to underground pipe rehabilitation.

I. Materials and Equipment

1. Lining Hoses: In the UV-CIPP repair process, glass fiber hoses are primarily used. These hoses are made by folding glass fiber fabric and impregnating it with light-curable resin. They can be custom-made in various shapes and sizes according to specific requirements. In certain specialized applications, other fiber materials or composite materials—such as carbon fiber hoses, aramid fiber hoses, or ceramic fiber hoses—may be considered.

2. Resins: Light-curable resins are the key materials in this technology, including various types such as polyester resins, epoxy resins, and vinyl resins. The selection of these resin materials can be made based on specific project requirements, pipe material, and construction conditions. After curing, the lining resin must exhibit excellent mechanical properties, chemical stability, and thermal stability, as well as high strength and corrosion resistance, ensuring that the repaired pipeline can operate stably over the long term.

3. Curing Equipment: The UV-CIPP repair process relies on ultraviolet light for curing, so the curing equipment used is a UV lamp chain. The UV lamp chain consists of multiple UV lamps connected by flexible connectors, forming a bendable chain of lamps. The length of the lamp chain and the number of lamps can be customized according to specific requirements. The UV lamp chain is capable of irradiating the pipe wall from all 360 degrees, ensuring uniform curing of the resin. It can also be equipped with cameras or other monitoring devices, enabling operators to monitor the condition inside the pipe in real time and make adjustments as needed.

4. Pulling in or flipping the device: The construction process typically involves two methods—flipping and pulling in. The equipment used includes an introduction sleeve, a pressurization sleeve, a flipping sleeve, and other components, which are employed to either flip or pull the hose material into the pipeline to be repaired.

5. Auxiliary equipment: CCTV inspection equipment, etc.

II. On-site Construction Process

1. Pipeline Cleaning: First, select an appropriate water-stop device to seal off the upstream section, ensuring that no water flow interferes with the construction area. Then, use a high-pressure flushing device to perform high-pressure cleaning and remove sediment from inside the pipeline.

2. Pipeline Inspection: Before proceeding with repair, CCTV pipeline inspection equipment is introduced into the pipeline to conduct a thorough inspection. The inspection aims to identify any signs of collapse, cracks, misalignment, or other defects in the pipeline. It also involves confirming the pipeline’s material and diameter to ensure the selection of an appropriate liner material. Additionally, the inspection ensures that there are no obvious obstructions such as sludge or stones. Based on the inspection results, we assess whether the pipeline meets the conditions for liner-based repair. If necessary, preliminary treatments will be carried out—for instance, localized spot repairs addressing small areas of collapse, damage, or sharp rebar protrusions.

3. Installing the liner hose: First, lay a cushioning film inside the existing pipe, placing it at the bottom of the pipe to ensure that the material can enter smoothly without friction, thereby protecting the liner material from scratches during the pulling-in process. Next, pull the pre-fabricated liner hose into the pipe and inflate it by introducing air into the hose, allowing it to fully expand and tightly adhere to the inner wall of the existing pipe.

4. Curing: Place the UV lamp string of a specific wavelength into the inflated hose. Determine the pulling speed of the lamp string based on the hose diameter, wall thickness, and lamp holder configuration, ensuring that the hose is gradually cured from one end to the other. At the same time, use a CCTV camera to monitor the curing process in real time, observing whether any abnormalities such as bubbles or cracks occur during curing, thereby guaranteeing the quality of the curing process.

5. Processing Pipe Ends: Use a pneumatic cutting tool or appropriate cutting equipment to cut the pipe ends of the liner pipe smoothly, ensuring tight sealing when connecting them to the existing pipe or subsequent pipes. Any burrs, protrusions, or other irregularities on the pipe ends should be sanded or trimmed to ensure they are smooth and even. Depending on the specific situation, you can use quick-setting cement, specialized sealant, or other suitable connection methods to join the liner pipe’s pipe ends to the existing pipe or subsequent pipes.

6. CCTV Inspection: Using CCTV inspection, confirm whether the pipeline, after UV-CIPP lining repair, has cracks, bubbles, other defects, or unresolved issues. Also, assess the internal condition of the pipeline, including the smoothness and integrity of the lining as well as its fit against the original pipe.

UV-CIPP repair technology is an efficient and environmentally friendly method for repairing underground pipelines, and it has been widely adopted in pipeline rehabilitation projects around the world. The above outlines the basic construction procedure for UV-CIPP liner pipe rehabilitation. It’s important to note that the specific construction process may vary slightly depending on different project conditions and technical requirements. Furthermore, all construction activities should comply with relevant safety regulations and technical standards.

Disclaimer: The above content is sourced from the internet and is for reference only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


UV-CIPP Liner Pipe Rehabilitation Construction Process

The CIPP (Cured-In-Place Pipe) liner rehabilitation technology originated in the United Kingdom during the 1970s. As a trenchless rehabilitation method, CIPP was initially designed for lining and rehabilitating drainage pipes, water supply pipes, gas pipelines, and other similar conduits. This technology is suitable for renovating and rehabilitating pipes with diameters ranging from 100 mm to 1,500 mm—and can even be used to repair extremely large pipes exceeding two meters in diameter. The materials of the existing pipes—including cast iron, steel, concrete, and plastics—demonstrate the broad applicability of CIPP technology. Starting in the 1980s, UV-CIPP technology began to be adopted in developed countries such as the UK, the U.S., Germany, and Japan. This advanced technique uses ultraviolet light to cure resin-soaked hoses that have been pulled into the existing pipe, forming a durable inner pipe lining. Compared to traditional construction methods, UV-CIPP is more convenient, faster, and has a smaller environmental impact, gradually gaining widespread adoption around the world.


A Brief Analysis of the Ground State and Excited State

In physics and chemistry, the ground state refers to the lowest-energy state of a system, whereas an excited state is the condition in which electrons are promoted to higher energy levels after absorbing energy. For atoms or molecules, in the ground state, electrons move in orbitals closest to the nucleus; in an excited state, however, electrons have jumped to orbitals with higher energy levels. Such transitions are typically accompanied by the absorption or emission of energy—for example, through the absorption or emission of photons.


What is the hot stamping printing process?

Hot foil stamping is a common printing process that uses thermal energy to roll metallic or colored foils onto the surface of printed materials, creating effects such as metallic luster, colorful patterns, and text. Typically, hot foil stamping requires a gilding machine or a hot stamping machine, which places the metallic or colored foil precisely at the desired location and then applies heat and pressure to bond the foil firmly to the surface of the printed material. Due to the specialized equipment involved, hot foil stamping tends to be relatively expensive. However, its high-quality and precise results make this printing technique highly favored in the premium market and for high-end products.