Routine Testing of UV Tobacco Packaging Ink Performance


As consumers increasingly demand higher standards for product packaging quality, the processes involved in tobacco packaging have become ever more complex and sophisticated, driving a corresponding rise in the pursuit of superior print quality. This trend has, in turn, spurred continuous optimization of printing ink performance. As a special type of printing ink, UV ink plays a crucial role in tobacco packaging thanks to its unique curing mechanism and color stability. Therefore, when testing UV ink for tobacco packaging, we not only need to focus on its basic physical and chemical properties but also take into account its performance during the printing process and the ultimate quality of the printed materials. Hence, we must employ scientific and reliable testing methods to ensure that the quality and performance of UV ink for tobacco packaging meet the stringent requirements of high-end tobacco packaging.

The following are the standard tests and methods for evaluating the performance of UV cigarette pack inks.

1. Fineness: Fineness is a critical parameter that is typically measured using a fineness meter. Generally, the standard requirement for fineness does not exceed 15 microns. To enhance the tinting strength of UV inks, we can raise the fineness standard to below 10 microns. The fineness index is closely related to the dispersibility of pigments within the ink. Specifically, the lower the fineness, the more uniform the dispersion of pigments will be, resulting in brighter ink colors and improved tinting strength.

2. Hue: Determined by comparing the color differences between the ink standard sample and the test sample. In the past, hue detection relied primarily on manual methods: the ink standard sample and the test sample were placed separately on a scraping paper, scraped side by side, and then the ink impressions left on the scraping paper were visually compared with the standard sample to assess the hue. This method heavily depended on the inspector’s professional experience and judgment, thus posing a high risk of human error. With technological advancements, today ink colorimeters are commonly used to spread both the ink standard sample and the test sample onto color charts. Under standardized lighting conditions, the Lab values of these color charts are measured, and the color difference ΔE is calculated, thereby achieving digitization and standardization of hue detection.

3. Viscosity and Flowability: To accurately assess these properties, specialized testing instruments are commonly used, such as the gloss meter and parallel-plate viscometer. For more in-depth studies, falling-ball viscometers, cone-and-plate viscometers, and rheometers are employed. Both viscosity and flowability are significantly influenced by temperature; maintaining stable temperature and humidity conditions is a prerequisite for UV inks to exhibit optimal printability. Therefore, printing companies need to carefully control workshop temperature to ensure that the inks maintain their excellent printability.

4. Curing Speed: Curing speed is a key indicator for measuring the efficiency of ink curing. It is typically assessed using a UV curing unit, and the degree of curing is characterized by the finger-dry method. The curing speed is influenced not only by the intrinsic properties of the ink itself but also directly by the power output of the UV lamp. Specifically, a high-power UV lamp can significantly accelerate the curing process during printing, thereby enhancing overall production efficiency.

5. Adhesion Testing: The magnitude of adhesion primarily depends on the surface tension of the substrate. A common testing method involves using a dyne pen (also known as a surface tension test pen) to write on the substrate’s surface and observing the continuity, uniformity, and presence of any shrinkage in the ink lines. These observations directly reflect the surface tension condition of the substrate. Typically, conventional UV inks exhibit strong adhesion when printed on pure paper substrates; however, their adhesion performance varies significantly when applied to plastic films.

6. Flexibility Testing: Using a MIT flexometer or a Schopper-type tester, fold the printed material at a 180-degree angle and repeat this process 10 times. Observe whether the UV ink coating on the cigarette pack paper is damaged. Specifically, check whether obvious cracks or delamination of the coating appear along the fold lines. If no significant damage or delamination is observed, the product is considered qualified.

7. Abrasion and Scratch Resistance Testing: This test is designed to evaluate the ability of a coating film to maintain its surface integrity when subjected to friction or scratching. Typically, specialized instruments are used for this purpose; for instance, an ink abrasion tester can be employed to assess the abrasion resistance of printing inks. During the test, the item under examination is first securely fixed onto a friction table, and then friction paper is attached to the friction body. Next, the friction body moves back and forth across the sample surface at a predetermined speed and frequency. After the test is completed, the abrasion resistance of the ink coating is evaluated by measuring the color density of the most severely affected area following friction. For scratch resistance testing, scratch tests or wear tests are usually conducted. These tests simulate real-world conditions where scratches or wear might occur, allowing us to assess the integrity and durability of the ink layer under specific forces and numbers of cycles.

UV ink for cigarette packaging must possess excellent performance characteristics to meet printing requirements and ensure the quality and safety of the final product. At the same time, different brands of UV ink for cigarette packaging may have varying testing standards and methods. Therefore, when selecting UV ink for cigarette packaging, it is essential to make choices and conduct inspections based on specific product needs and quality standards.

Disclaimer: The above content is sourced from the internet and is for reference purposes only. If any infringement occurs, please contact us, and we will remove it promptly. 

Share to:

Related News


What are the common acrylic resins available on the market?

Acrylic resins are a general term for polymers derived from acrylic acid, methacrylic acid, and their derivatives. Acrylic resin coatings are thermoplastic or thermosetting resin coatings obtained by copolymerizing methyl methacrylate and styrene as the main components with other acrylates. During the manufacturing process, by carefully selecting different resin structures, formulating tailored compositions according to specific requirements, optimizing production processes, and employing various combinations of solvent ingredients, we can successfully synthesize a wide variety of acrylic resins with diverse properties and suitable for different application scenarios.


A Brief Discussion on the State and Indicators of Epoxy Resins

Epoxy resins refer to a general class of polymers whose molecules contain two or more epoxy groups. Under the action of specific chemical reagents, these epoxy groups can crosslink with each other, forming a robust, three-dimensional, network-like cured structure. Epoxy resins encompass not only oligomers containing epoxy groups but also low-molecular-weight compounds bearing epoxy groups. Epoxy resins exhibit a wide range of physical states—from liquid and viscous to solid—but their individual forms have little direct practical value on their own. It is only when epoxy resins react with curing agents to form insoluble and non-melting three-dimensional network polymers that their full performance characteristics are realized. Due to the chemical reactivity of the epoxy groups, they can be opened by a variety of compounds containing active hydrogen atoms, leading to curing and crosslinking into a network structure; thus, epoxy resins are thermosetting resins.


How to reduce infrared (IR) radiation generated by UV curing

UV curing technology is an efficient material-curing process that has found widespread application, particularly in industries such as printing, coatings, and adhesives. In this process, ultraviolet (UV) light plays a crucial role: through its unique photochemical reactions, it enables resins and other materials to cure in an extremely short time. However, during UV curing, in addition to UV light, infrared radiation and heat are also generated. This phenomenon primarily stems from the fact that the light sources used in UV curing equipment, while emitting UV light, also emit a certain amount of infrared radiation. Infrared radiation is a type of electromagnetic wave with a wavelength longer than visible light but shorter than microwaves. A key characteristic of infrared radiation is its thermal effect—when absorbed by an object, it is converted into thermal energy, causing the object's temperature to rise. In UV curing equipment, infrared radiation is mainly emitted by the quartz bulb within the UV source. The quartz bulb is one of the core components of a UV lamp; its primary function is to protect the electrodes and luminous elements inside the lamp while allowing UV light to pass through. However, due to the material properties and structural design of the quartz bulb, it cannot completely block the emission of infrared radiation. Consequently, during UV curing, infrared radiation is emitted alongside UV light and irradiates the material being cured.