Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
The Differences Between Dental UV 3D Printing and Traditional Dentistry
Release time:
2026-08-08 06:39
The dental field is undergoing a technological transformation, shifting from traditional manual techniques to digital manufacturing. UV‑curing 3D printing, as a representative additive manufacturing technology, differs significantly from conventional methods such as lost‑wax casting and hot‑press forming in terms of workflow, precision, material properties, and clinical experience. These differences are reshaping the production of dental restorations and orthodontic appliances, driving the entire industry toward digitalization and intelligent manufacturing.
I. Differences in Work Processes
Traditional dental prosthetic fabrication relies on numerous manual steps. Take the casting method for crown production as an example: it involves impression taking, plaster model pouring, wax pattern fabrication, investment, casting, and polishing—each stage depending on the clinician’s hands‑on expertise, resulting in a lengthy and multi‑step process. Although the manufacturing workflow for conventional complete dentures is relatively well established, the overall procedure remains cumbersome, heavily reliant on the subjective experience of both clinicians and laboratory technicians, with poor reproducibility and, in particular, a lack of objective, quantifiable criteria for establishing the occlusal relationship.
UV 3D printing, with its digital workflow, has fundamentally transformed this paradigm. After intraoral scanning captures three-dimensional dental data, CAD software is used to design the restorative restoration; the model is then sliced and directly fabricated layer by layer using a printer. Thanks to its high precision and rapid processing, UV‑curable resin has found widespread application in dentistry, and its technological approaches are rapidly advancing across orthodontics, prosthodontics, and implantology. New solutions—such as long‑lasting crowns for restorations, full‑arch implant rehabilitation, and the direct fabrication of memory‑shaped orthodontic appliances—are increasingly being adopted and gaining recognition.
The advantages of digital workflows have been validated across multiple dimensions. Both chairside time and laboratory fabrication time for digital complete dentures are significantly shorter than with conventional methods. Although the material costs for digital complete dentures have increased, the simplification of clinical procedures and improved efficiency have led to a substantial reduction in labor costs, resulting in markedly favorable overall economic benefits.
II. Differences in Precision and Suitability
In terms of accuracy, the two methods each have distinct characteristics. Comparative studies between 3D-printed dental models and traditional plaster models have shown that the differences between them are minimal, with 3D-printed models exhibiting lower error rates, thus demonstrating potential for use in the fabrication of implant‑supported restorations. In the implant‑site region, 3D‑printed models outperform those in the interdental areas, a finding that holds important implications for the clinical application of implant‑based rehabilitation.
However, some studies have also reported that conventional mold‑making methods achieve higher accuracy on certain metrics. The discrepancies among these findings underscore the need for careful evaluation of the reliability of 3D‑printed dental models when making a selection.
Regarding marginal fit, a comparative study of different fabrication techniques on the overall fit of single‑unit crowns revealed that the 3D‑printed polymer casting group exhibited some deviations, whereas direct metal laser sintering yielded results comparable to those of hand‑crafted wax patterns and demonstrated superior marginal and internal adaptation in posterior crown frameworks.
III. Comparison of Mechanical Properties
Mechanical properties are a key metric for assessing the reliability of restorations. Because 3D printing employs a layer-by-layer additive manufacturing process, the mechanical performance of the materials is typically lower than that of conventionally produced materials; however, the performance of 3D-printed materials still meets the relevant standards for various dental applications. 3D-printed photopolymer resins have been shown to exhibit good biocompatibility, and this biocompatibility can be further enhanced through post-processing steps such as washing and post-curing.
In terms of provisional restorations, 3D‑printed materials have demonstrated relatively stable durability, indicating that DLP‑printed temporary prostheses possess sufficient reliability for clinical use.
IV. Conclusion
Dental UV 3D printing and traditional methods each have distinct strengths in workflow, precision, mechanical properties, and clinical experience. Traditional approaches still hold advantages for single‑piece, high‑precision restorations and certain mechanical‑strength metrics, whereas 3D printing excels in integrating digital workflows, enhancing production efficiency, and improving the patient experience. In most cases, 3D‑printed dental models can serve as a viable alternative to conventional plaster models; however, careful evaluation remains necessary in specific applications with stringent precision requirements. With regard to material mechanical performance, temporary restorations are already sufficiently stable, while the performance of long‑term restorations continues to improve.
Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.
Bossin Related Product Recommendations – 3D Printing | ||
Dentistry | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-100M | Bisphenol A epoxy acrylate | Low viscosity, high hardness, high gloss, and high body. |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-276H | Aliphatic polyurethane acrylate | High hardness, fast curing, excellent toughness, and low yellowing. |
B-296 | Aliphatic polyurethane acrylate | Fast curing, chemical resistance, yellowing resistance, impact resistance |
B-296M | Polyurethane acrylate | Fast curing, resistant to polar solvents, yellowing-resistant, and impact-resistant. |
B-301 | Aromatic polyurethane acrylate | Fast curing, excellent toughness, and good sandability. |
B-302 | Aromatic polyurethane acrylate | Fast curing, high strength, excellent toughness, and good grindability. |
B-368 | Aliphatic polyurethane acrylate | Good toughness, excellent leveling, excellent bend resistance, and excellent heat resistance. |
B-376 | Aliphatic polyurethane acrylate | LED yellowing is minimal, and the nail polish formulation exhibits excellent stability. |
B-609 | Aliphatic polyurethane acrylate | Fast curing, high hardness, scratch resistance, and chemical resistance. |
B-79D | Polyester acrylate | High hardness, low yellowing, and high evaporation efficiency at elevated temperatures. |
Monomer Recommendation | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
BM1211 (HPMA) | Hydroxypropyl methacrylate | HEMA-free, high strength, low irritation, and excellent adhesion |
BM2223 (TPGDA) | Di(propylene glycol) diacrylate | Good flexibility and low volatility |
BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
BM3235 (PET3A) | Pentaerythritol triacrylate | Fast curing, high crosslink density, high hardness, and chemical resistance. |
BM3380 (3EO-TMPTA) | Pentaerythritol triacrylate | More flexible and less irritating than TMPTA. |
Share to:
Related News