Tel
Tel
+8618142863185
Follow us
Official Accounts
Official Accounts
- Top
Common Defects in UV Wood Coatings (Part 3)
Release time:
2026-03-11 23:19
In the industrial coating of UV wood coatings, roll coating has become the preferred method for applying finishes to flat wooden products due to its high efficiency and ability to deliver uniform film application. However, a recurring coating defect often occurs during roll coating: the surface of the paint film exhibits strip-like patterns that run parallel to the direction of roller movement. These patterns display distinct periodic characteristics, with spacing consistent with either the circumference of the roller or the pattern embossed on its surface. In severe cases, the streaks are coarse and highly visible; in milder instances, one must rely on oblique lighting to discern faint, varying shades of shadow along the lines. The paint film thickness is uneven at the locations where these streaks appear—areas that protrude feel rough to the touch, while recessed areas exhibit slightly lower gloss. When applied to colored or high-gloss coatings, this phenomenon can lead to inconsistent color tones or noticeable differences in sheen, severely compromising the aesthetic appeal of the finished product. The formation of roller marks is by no means accidental; rather, it stems from a complex interplay of technical factors ranging from equipment precision to coating properties.
I. Description of the Phenomenon
The coated surface exhibits regular, strip-like patterns that run parallel to the direction of roller movement. These patterns display a distinct periodicity, with spacing consistent with either the circumference of the roller or the pitch of the pattern on the roller. In severe cases, the patterns are coarse and readily visible to the naked eye; in milder instances, they can only be observed under side lighting or strong oblique illumination, appearing as alternating bands of varying shades of darkness. The paint film thickness is uneven at the locations of these patterns: raised areas feel rough to the touch, while recessed areas exhibit slightly reduced gloss. When applying colored paints or high-gloss finishes, roller marks can lead to uneven color intensity or differences in gloss, severely compromising the decorative effect.
II. In-depth Analysis of the Underlying Causes
1. Mechanical Precision Failure
(1) Geometric Deformation of Rollers: After prolonged use, the surface of coating rollers or metering rollers may experience uneven wear, or slight bending due to uneven pressure, resulting in inconsistent line pressure where the roller contacts the sheet material. In areas with higher pressure, the paint film is thinner; in areas with lower pressure, the paint film is thicker, leading to periodic variations in film thickness.
(2) Roller Runout: Wear on the roller bearings or eccentric installation causes radial runout during rotation, and each instance of runout leaves an impact mark on the wet film.
2. Fluctuations in the Feeding System
(1) Metering Pump Pulsation: If the metering pump supplying paint between the rollers pulsates excessively, it will cause the amount of paint accumulating at the roller gap to fluctuate periodically, ultimately resulting in uneven thickness across the width of the paint film.
(2) Foreign Matter in the Roller Gap: If dried paint particles or impurities become lodged in the gap between the coating roller or the applicator roller, they can locally widen the gap, leaving a thick, longitudinal mark that runs continuously across the entire surface of the sheet.
3. Poor paint transferability
UV paint exhibits poor wettability on the roller, resulting in unstable transfer rates as the paint moves from the metal roller to the rubber roller and then from the rubber roller to the sheet material, leading to localized stringing or buildup.
III. Conclusion
The essence of roller marks lies in the external manifestation of periodic fluctuations in coating film thickness during the coating process. Their root causes span multiple levels, including mechanical precision failures, fluctuations in the supply system, and poor paint transfer efficiency. Geometric deformation or radial runout of the rollers leads to an uneven distribution of linear pressure, directly resulting in regular variations in coating film thickness. Pulsations in the metering pump or foreign objects in the roll gap disrupt the stability of paint supply, leaving longitudinal marks on the substrate surface. Furthermore, poor wetting performance of the coating on the rollers exacerbates the non-uniformity during the transfer process. These factors accumulate and ultimately give rise to periodic striped patterns on the coated surface, causing the coating film to lose its intended smoothness and uniformity.
Disclaimer: The above content is sourced from the internet and is for reference only; if any content infringes upon your rights, please contact us and we will remove it as soon as possible.
Bossin Recommended Products – UV Wood Coatings | ||
Putty primer | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective. |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost performance. |
Sanding Primer | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and strong adhesion. |
B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective. |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost performance. |
Primer | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-02 | Phosphate ester acrylate | Enhance adhesion to substrates such as metal, glass, and plastic. |
B-05 | Phosphate ester acrylate | Enhance adhesion to substrates such as metal, glass, and plastic. |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-165 | Modified epoxy acrylate | Good flexibility and strong adhesion. |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost performance. |
B-535 | Polyester acrylate | Good adhesion, fast curing, excellent flexibility, and yellowing resistance. |
B-546 | Polyester acrylate | Good adhesion, fast curing, and excellent flexibility. |
White primer | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and strong adhesion. |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective. |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost performance. |
B-529 | Polyester acrylate | Good adhesion, low shrinkage, and excellent resin compatibility. |
B-560 | Polyester acrylate | Fast curing and excellent pigment wetting. |
Glossy topcoat | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
B-165 | Modified epoxy acrylate | Good flexibility and strong adhesion. |
B-21C | Active amine photoinitiator | Low color, antioxidant and polymerization inhibitor, enhanced curing rate |
B-301 | Aromatic Polyurethane Acrylate | Fast curing, good toughness, and excellent grindability. |
B-302 | Aromatic Polyurethane Acrylate | Fast curing, high strength, good toughness, and excellent grindability. |
B-574C | Polyester acrylate | Low viscosity, low odor, good wettability, suitable for LED UV. |
B-601 | Aromatic Polyurethane Acrylate | High hardness, scratch resistance, chemical resistance, and excellent value for money. |
B-609 | Aliphatic polyurethane acrylate | Fast curing, high hardness, scratch resistance, and chemical resistance. |
B-868 | Organosilicon Photocurable Resin | Good leveling, smooth finish, fast curing, and stain resistance. |
B-868H | Organosilicon Photocurable Resin | Good leveling, smooth finish, fast curing, and stain resistance. |
B-910A2 | Aliphatic polyurethane acrylate | Low viscosity, yellowing resistance, chemical resistance, and steel wool resistance. |
B-912 | Aliphatic polyurethane acrylate | Fast curing, high hardness, good toughness, and excellent chemical and abrasion resistance. |
Matte finish paint | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and strong adhesion. |
B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
B-21C | Active amine photoinitiator | Low color, antioxidant and polymerization inhibitor, enhanced curing rate |
B-328M | Aliphatic polyurethane acrylate | Low gloss, low viscosity, good wettability, pleasant to the touch. |
B-328R | Aliphatic polyurethane acrylate | Low gloss, excellent matting effect, good wetting properties, and a fine, smooth hand feel. |
B-333 | Aliphatic polyurethane acrylate | Low viscosity, good matting effect, excellent wettability, and good flexibility. |
B-572 | Polyester acrylate | Low viscosity, low odor, good wettability, suitable for LED UV. |
B-650A | Aliphatic polyurethane acrylate | Low viscosity, good matting effect, fast curing, and excellent wettability. |
B-868 | Organosilicon Photocurable Resin | Good leveling, smooth finish, fast curing, and stain resistance. |
B-868H | Organosilicon Photocurable Resin | Good leveling, smooth finish, fast curing, and stain resistance. |
B-910A2 | Aliphatic polyurethane acrylate | Low viscosity, yellowing resistance, chemical resistance, and steel wool resistance. |
B-912 | Aliphatic polyurethane acrylate | Fast curing, high hardness, good toughness, and excellent chemical and abrasion resistance. |
Bright white paint | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and strong adhesion. |
B-301 | Aromatic Polyurethane Acrylate | Fast curing, good toughness, and excellent grindability. |
B-302 | Aromatic Polyurethane Acrylate | Fast curing, high strength, good toughness, and excellent grindability. |
B-560 | Polyester acrylate | Fast curing and excellent pigment wetting. |
B-574C | Polyester acrylate | Low viscosity, low odor, good wettability, suitable for LED UV. |
B-601 | Aromatic Polyurethane Acrylate | High hardness, scratch resistance, chemical resistance, and excellent value for money. |
B-868 | Organosilicon Photocurable Resin | Good leveling, smooth finish, fast curing, and stain resistance. |
B-868H | Organosilicon Photocurable Resin | Good leveling, smooth finish, fast curing, and stain resistance. |
B-912 | Aliphatic polyurethane acrylate | Fast curing, high hardness, good toughness, and excellent chemical and abrasion resistance. |
Adherent | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-05 | Phosphate ester acrylate | Enhance adhesion to substrates such as metal, glass, and plastic. |
B-509B | Polyester acrylate | Good adhesion, excellent flexibility, and excellent pigment wetting. |
B-531 | Polyester acrylate | Good adhesion, impact resistance, excellent flexibility, and yellowing resistance. |
B-535 | Polyester acrylate | Good adhesion, fast curing, excellent flexibility, and yellowing resistance. |
B-546 | Polyester acrylate | Good adhesion, fast curing, and excellent flexibility. |
B-590 | Polyester acrylate | Good adhesion, fast curing, and excellent pigment wetting. |
Filler type | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective. |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost performance. |
B-529 | Polyester acrylate | Good adhesion, low shrinkage, and excellent resin compatibility. |
Retouch color | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-560 | Polyester acrylate | Fast curing and excellent pigment wetting. |
Hardened | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-301 | Aromatic Polyurethane Acrylate | Fast curing, good toughness, and excellent grindability. |
B-302 | Aromatic Polyurethane Acrylate | Fast curing, high strength, good toughness, and excellent grindability. |
B-560 | Polyester acrylate | Fast curing and excellent pigment wetting. |
B-574C | Polyester acrylate | Low viscosity, low odor, good wettability, suitable for LED UV. |
B-601 | Aromatic Polyurethane Acrylate | High hardness, scratch resistance, chemical resistance, and excellent value for money. |
B-912 | Aliphatic polyurethane acrylate | Fast curing, high hardness, good toughness, and excellent chemical and abrasion resistance. |
Matte | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-328M | Aliphatic polyurethane acrylate | Low gloss, low viscosity, good wettability, pleasant to the touch. |
B-328R | Aliphatic polyurethane acrylate | Low gloss, excellent matting effect, good wetting properties, and a fine, smooth hand feel. |
B-329D | Aliphatic polyurethane acrylate | Low irritation, low viscosity, excellent wettability, and pleasant to the touch. |
B-333 | Aliphatic polyurethane acrylate | Low viscosity, good matting effect, excellent wettability, and good flexibility. |
B-650A | Aliphatic polyurethane acrylate | Low viscosity, good matting effect, fast curing, and excellent wettability. |
Solid-color paint | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-519 | Self‑Curing Polyester Acrylate | Self‑initiated Photocuring Performance |
B-530 | Polyester acrylate | Low viscosity, excellent hydrophobicity, thixotropic properties, and improved ink mist. |
B-560 | Polyester acrylate | Fast curing and excellent pigment wetting. |
Yellowing resistance | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and strong adhesion. |
B-431 | Alicyclic Specialty Acrylates | Yellowing resistance, excellent wettability, low viscosity, fast curing. |
Coating by spraying | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and strong adhesion. |
Roller Coating | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-100 | Bisphenol A epoxy acrylate | High hardness, high gloss, excellent chemical resistance, and rich body. |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-160D | Modified epoxy acrylate | Good flexibility, yellowing resistance, and strong adhesion. |
B-163 | Modified epoxy acrylate | Good flexibility, excellent pigment wetting, and strong adhesion. |
B-165 | Modified epoxy acrylate | Good flexibility and strong adhesion. |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective. |
B-522 | Polyester acrylate | Low shrinkage, excellent flexibility, strong adhesion, and high cost performance. |
Solvent-free spraying | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-251 | Aromatic Polyurethane Acrylate | Fast curing, excellent flexibility, and good wetting performance with black ink pigments. |
B-520 | Polyester acrylate | Low viscosity, high gloss, excellent wettability, and cost-effective. |
B-574C | Polyester acrylate | Low viscosity, low odor, good wettability, suitable for LED UV. |
LED-UV | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-21C | Active amine photoinitiator | Low color, antioxidant and polymerization inhibitor, enhanced curing rate |
B-27 | Active amine photoinitiator | Low color, benzene-free, low odor, antioxidant and anti‑polymerization. |
B-570 | Polyester acrylate | Low viscosity, benzene‑free, low odor, suitable for LED UV. |
B-574 | Polyester acrylate | Benzene-free, low odor, and VOCs meet cigarette pack standards. |
B-574C | Polyester acrylate | Low viscosity, low odor, good wettability, suitable for LED UV. |
Excimer lamp | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-241 | Aliphatic polyurethane acrylate | Fast matting speed, excellent skin feel, and yellowing resistance. |
Skin feel | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
B-113 | Bisphenol A epoxy acrylate | High hardness, high gloss, high fullness, containing 20% TPGDA. |
B-165 | Modified epoxy acrylate | Good flexibility and strong adhesion. |
B-241 | Aliphatic polyurethane acrylate | Fast matting speed, excellent skin feel, and yellowing resistance. |
B-328M | Aliphatic polyurethane acrylate | Low gloss, low viscosity, good wettability, pleasant to the touch. |
B-328R | Aliphatic polyurethane acrylate | Low gloss, excellent matting effect, good wetting properties, and a fine, smooth hand feel. |
B-574C | Polyester acrylate | Low viscosity, low odor, good wettability, suitable for LED UV. |
B-868 | Organosilicon Photocurable Resin | Good leveling, smooth finish, fast curing, and stain resistance. |
B-868H | Organosilicon Photocurable Resin | Good leveling, smooth finish, fast curing, and stain resistance. |
Monomer Recommendations | ||
Product Model/English Abbreviation | Product Name/Product Type | Product Features |
BM2223 (TPGDA) | Di(propylene glycol) diacrylate | Good flexibility and low volatility. |
BM2224 (EO-HDDA) | Ethoxylated 1,6-hexanediol diacrylate | Good adhesion to plastics, excellent dilutability, and low volatility. |
BM3231 (TMPTA) | Trimethylolpropane triacrylate | High crosslink density, high hardness, high gloss, and excellent wear resistance. |
BM3235 (PET3A) | Pentaerythritol triacrylate | Fast curing, high crosslink density, high hardness, and excellent chemical resistance. |
BM3380 (3EO-TMPTA) | Ethoxylated trimethylolpropane triacrylate | More flexible and less irritating than TMPTA. |
BM6261 (DPHA-80) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and abrasion resistance, and water resistance. |
BM6263 (DPHA-90) | Dipentaerythritol hexaacrylate | High crosslink density, high hardness, chemical and abrasion resistance, and water resistance. |
Share to:
Related News