Analysis of the Action Mechanism of UV-Curable Adhesives


UV adhesives, formally known as ultraviolet‑curable adhesives, are specialized adhesives that rapidly undergo crosslinking and cure upon exposure to ultraviolet light of a specific wavelength. As an efficient, environmentally friendly, and energy‑saving advanced bonding material, they have been widely employed in recent years across industries such as electronics manufacturing, optical devices, medical equipment, printing and packaging, and precision assembly.

I. Basic Composition of UV Adhesives

To understand its mechanism of action, it is first necessary to examine the main components of UV adhesive. A typical UV adhesive consists of the following parts:

1. Prepolymers: They constitute the main structural backbone of the coating and determine the mechanical properties, flexibility, thermal stability, and adhesion of the final cured product. Common prepolymers include epoxy acrylates, polyurethane acrylates, and polyester acrylates, among others.

2. Reactive diluents: Used to adjust the viscosity of the adhesive and improve its flowability, while also participating in the curing reaction to increase crosslink density. Depending on the number of functional groups, they can be classified as monofunctional, bifunctional, or polyfunctional diluents.

3. Photoinitiator: This is the key component that enables UV-curable adhesives to undergo photopolymerization. Upon exposure to ultraviolet light, the photoinitiator absorbs energy and decomposes into free radicals or cations, thereby initiating a chain‑growth polymerization reaction between monomers and prepolymers.

4. Additives: These include leveling agents, defoamers, plasticizers, stabilizers, and others, used to optimize application performance, storage stability, and the final bonding properties.

II. The Working Process of UV Adhesive

The curing process of UV adhesive can be divided into three stages: the coating stage, the exposure stage, and the curing stage.

1. Coating Stage

Before application, the liquid UV adhesive must be evenly applied to one of the surfaces of the two materials to be bonded. At this stage, the adhesive should exhibit excellent wettability and leveling properties to ensure complete coverage of the substrate surface and penetration into minute gaps. Common dispensing methods include dispensing, blade coating, spraying, and screen printing, with the specific technique selected based on application requirements and the desired level of automation. At this point, the UV adhesive remains in its liquid state and will not cure on its own, allowing for adjustments and alignment within a certain time window, thereby facilitating precision assembly.

It should be noted that UV adhesive can only be used to bond materials that are at least partially transparent to ultraviolet light, as the UV radiation must penetrate the material to activate the photoinitiator within.

2. Exposure Phase

Once the adhesive has been applied and the assembly completed, the process proceeds to the light‑curing stage. The assembled component is placed under a UV light source and exposed for a specified duration, at which point the adhesive undergoes rapid chemical transformation. During this process, the photoinitiator absorbs ultraviolet energy, undergoing homolytic or heterolytic cleavage to generate highly reactive free radicals or cations. These active species immediately attack the double bonds in the prepolymers and reactive diluents, initiating a chain‑growth polymerization reaction. The polymer chains rapidly extend and crosslink with one another, forming a three‑dimensional network of macromolecular polymers. As the degree of crosslinking increases, the viscosity of the adhesive rises sharply, transitioning from a flowable state to an elastic gel and ultimately solidifying into a rigid solid. Throughout this process, virtually no by‑products are generated, and no solvents volatilize.

3. Curing Stage

After sufficient irradiation, the UV‑curable adhesive fully cures, attaining its specified mechanical strength and physical properties. At this stage, the bonded joint exhibits excellent shear strength, peel strength, and resistance to heat, moisture, and chemicals.

It is worth noting that insufficient illumination or areas left in shadow—such as occluded regions or the interiors of deep cavities—can result in incomplete local curing. To address this, practical applications often employ multi‑angle irradiation, extended exposure times, or combined thermal‑assisted curing to ensure overall curing quality.

III. Conclusion

Unlike traditional adhesives that rely on solvent evaporation or thermal curing, the defining feature of UV adhesives is “photo‑initiated curing”: ultraviolet light activates photoinitiators within the adhesive, triggering a polymerization reaction that rapidly transforms the liquid adhesive into a solid layer with high strength and a stable structure. This process is not only fast and highly efficient but also generates virtually no volatile organic compounds, aligning with the modern trend toward green manufacturing.

Disclaimer: The above content has been compiled from publicly available sources and is provided for reference only. If any infringement occurs, please contact us, and we will address it promptly.

Bossin Related Product Recommendations – UV Adhesives
Electronic structural adhesive
Product Model/English Abbreviation Product Name/Product Type Product Features
B-151 Modified epoxy acrylate Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion.
B-186 Modified epoxy acrylate Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant
B-2111D Aliphatic polyurethane acrylate Excellent adhesion, high elongation, and resistance to thermal shock.
B-2116 Aliphatic polyurethane acrylate Excellent adhesion, good flexibility, acid and alkali resistance, and excellent tensile strength.
B-215 Aliphatic polyurethane acrylate Good adhesion, excellent flexibility, water resistance, and acid resistance.
B-2622 Polyurethane acrylate Small shrinkage, excellent adhesion, good elongation, and excellent transparency.
B-295A Aliphatic polyurethane acrylate Fast curing, high hardness, resistant to boiling water and alkali.
Glass bonding
Product Model/English Abbreviation Product Name/Product Type Product Features
B-151 Modified epoxy acrylate Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion.
B-186 Modified epoxy acrylate Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant
B-2058P-2 Aliphatic polyurethane acrylate Excellent adhesion, resistant to strong acids and alkalis, and low curing shrinkage.
B-2111D Aliphatic polyurethane acrylate Excellent adhesion, high elongation, and resistance to thermal shock.
B-211A Aliphatic polyurethane acrylate Good adhesion, excellent flexibility, and water resistance.
B-215 Aliphatic polyurethane acrylate Good adhesion, excellent flexibility, water resistance, and acid resistance.
B-295A Aliphatic polyurethane acrylate Fast curing, high hardness, resistant to boiling water and alkali.
Plastic bonding
Product Model/English Abbreviation Product Name/Product Type Product Features
B-2111D Aliphatic polyurethane acrylate Excellent adhesion, high elongation, and resistance to thermal shock.
B-2116 Aliphatic polyurethane acrylate Excellent adhesion, good flexibility, acid and alkali resistance, and excellent tensile strength.
B-215 Aliphatic polyurethane acrylate Good adhesion, excellent flexibility, water resistance, and acid resistance.
B-2621 Aliphatic polyurethane acrylate Excellent adhesion, resistant to strong acids and alkalis, and low curing shrinkage.
B-2622 Polyurethane acrylate Small shrinkage, excellent adhesion, good elongation, and excellent transparency.
Glass bonding to metal
Product Model/English Abbreviation Product Name/Product Type Product Features
B-151 Modified epoxy acrylate Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion.
B-186 Modified epoxy acrylate Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant
B-2058P-2 Aliphatic polyurethane acrylate Excellent adhesion, resistant to strong acids and alkalis, and low curing shrinkage.
B-211A Aliphatic polyurethane acrylate Good adhesion, excellent flexibility, and water resistance.
B-215 Aliphatic polyurethane acrylate Good adhesion, excellent flexibility, water resistance, and acid resistance.
B-295A Aliphatic polyurethane acrylate Fast curing, high hardness, resistant to boiling water and alkali.
Solder Joint Protective Adhesive
Product Model/English Abbreviation Product Name/Product Type Product Features
B-151 Modified epoxy acrylate Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion.
B-151DT Modified epoxy acrylate Yellowing resistance, excellent flexibility, good plating performance, and strong adhesion.
B-163 Modified epoxy acrylate Good flexibility, excellent pigment wetting, and strong adhesion.
B-165 Modified epoxy acrylate Good flexibility and strong adhesion
B-186 Modified epoxy acrylate Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant
B-215 Aliphatic polyurethane acrylate Good adhesion, excellent flexibility, water resistance, and acid resistance.
B-221 Aliphatic polyurethane acrylate Fast curing, resistant to boiling water
B-296 Aliphatic polyurethane acrylate Fast curing, chemical resistance, yellowing resistance, impact resistance
Liquid optical adhesive
Product Model/English Abbreviation Product Name/Product Type Product Features
B-2111D Aliphatic polyurethane acrylate Excellent adhesion, high elongation, and resistance to thermal shock.
B-2116 Aliphatic polyurethane acrylate Excellent adhesion, good flexibility, acid and alkali resistance, and excellent tensile strength.
B-215 Aliphatic polyurethane acrylate Good adhesion, excellent flexibility, water resistance, and acid resistance.
B-2621 Aliphatic polyurethane acrylate Excellent adhesion, resistant to strong acids and alkalis, and low curing shrinkage.
Crystal epoxy resin
Product Model/English Abbreviation Product Name/Product Type Product Features
B-276H Aliphatic polyurethane acrylate High hardness, fast curing, excellent toughness, and low yellowing.
B-286 Aliphatic polyurethane acrylate Low heat generation, excellent toughness, wear resistance, and impact resistance.
B-296 Aliphatic polyurethane acrylate Fast curing, chemical resistance, yellowing resistance, impact resistance
B-296M Polyurethane acrylate Fast curing, resistant to polar solvents, yellowing-resistant, and impact-resistant.
Three-proof adhesive
Product Model/English Abbreviation Product Name/Product Type Product Features
B-02 Phosphate ester acrylate Enhance adhesion to substrates such as metal, glass, and plastic.
B-404 Aliphatic polyurethane acrylate Excellent flexibility and moisture stability
B-404C Aliphatic polyurethane acrylate Excellent flexibility and moisture stability
B-405 Aliphatic polyurethane acrylate Excellent adhesion and superior moisture stability.
B-405H Aliphatic polyurethane acrylate Excellent adhesion and superior moisture stability.
B-549 Polyester acrylate Low viscosity, adhesion, and weather resistance
LED bead protective adhesive
Product Model/English Abbreviation Product Name/Product Type Product Features
B-113 Bisphenol A epoxy acrylate High hardness, high gloss, high fullness, containing 20% TPGDA.
B-151 Modified epoxy acrylate Low halogen, yellowing-resistant, excellent plating performance, and strong adhesion.
B-160D Modified epoxy acrylate Good flexibility, yellowing resistance, and excellent adhesion.
B-166A Modified epoxy acrylate Good flexibility and strong adhesion
B-166A-85 Modified epoxy acrylate Good flexibility, excellent adhesion, contains 15% HEMA.
B-166A-85P Modified epoxy acrylate Good flexibility, excellent adhesion, contains 15% HEMA.
B-186 Modified epoxy acrylate Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant
High-temperature resistant
Product Model/English Abbreviation Product Name/Product Type Product Features
B-186 Modified epoxy acrylate Boil-resistant, excellent adhesion, high-temperature resistant, chemically resistant
B-191A Phenolic epoxy acrylate Fast curing and excellent heat resistance
B-548 Polyester acrylate Withstands high temperatures of 250–280°C.
B-919B Aliphatic polyurethane acrylate Fast curing, high hardness, excellent toughness, and superior chemical and wear resistance.
Anti-spy adhesive
Product Model/English Abbreviation Product Name/Product Type Product Features
B-251 Aromatic polyurethane acrylate Fast curing, excellent flexibility, and good wetting of black ink pigments.
B-254 Aliphatic polyurethane acrylate Flexibility, pigment wettability, and double 85 resistance
Odor-Neutralizing UV Gel
Product Model/English Abbreviation Product Name/Product Type Product Features
B-2621 Aliphatic polyurethane acrylate Excellent adhesion, resistant to strong acids and alkalis, and low curing shrinkage.
Peelable adhesive
Product Model/English Abbreviation Product Name/Product Type Product Features
B-368 Aliphatic polyurethane acrylate Good toughness, excellent leveling, excellent bend resistance, and excellent heat resistance.
Water and oxygen barrier
Product Model/English Abbreviation Product Name/Product Type Product Features
B-291 Aliphatic polyurethane acrylate Low shrinkage, moderate softness and toughness, excellent chemical resistance, and superior water and oxygen barrier properties.
Monomer Recommendation
Product Model/English Abbreviation Product Name/Product Type Product Features
BM1105 (OPPEA) 邻-Phenylphenoxyethyl acrylate Low shrinkage, excellent adhesion, low volatility, high refractive index
BM1210 (PHEA) 2-Phenoxyethyl acrylate Low shrinkage, heat resistance, excellent adhesion, high refractive index
BM1211 (HPMA) Hydroxypropyl methacrylate HEMA-free, high strength, low irritation, and excellent adhesion
BM2101M (10EO-BPADMA) Bisphenol A dimethacrylate ethoxylate Low irritation, flexibility, excellent strength, and heat resistance
BM2224 (EO-HDDA) Ethoxylation of 1,6-hexanediol diacrylate It exhibits excellent adhesion to plastics, good dilutability, and low volatility.

Share to:

Related News


Raw materials of UV adhesives

Ultraviolet (UV)-curable adhesives, commonly referred to as UV adhesives, are functional materials that undergo rapid crosslinking and curing upon exposure to ultraviolet light of a specific wavelength. They offer numerous advantages, including fast curing, energy efficiency, environmental friendliness, zero solvent emissions, high space utilization, and suitability for automated production. The exceptional performance of UV adhesives stems from their carefully engineered formulations and the synergistic effects of multiple functional components.


The Evolution of Adhesives

Adhesives, those remarkable substances that bond diverse materials, have accompanied the entire trajectory of human civilization. From ancient natural adhesives to today’s synthetic and smart adhesives, each technological leap has profoundly shaped both production and daily life. This article provides a comprehensive overview of the evolution of adhesives, illuminating the scientific and technological forces driving their development as well as the shifting social demands that have shaped their progress.


Types of Adhesives

Adhesives, also known as bonding agents or glues, are functional materials that firmly join dissimilar substrates through interfacial interactions. They play a crucial role in industrial manufacturing, construction, and everyday life. Depending on the classification criteria, adhesives can be categorized into various types, each with distinct properties and specific applications.